Download the Ultenic APP and follow theinstructions in the app to complete the Wi-Ficonnection. Then you can control your robotvia this app. Refer to User Guide for furtherdetails.Remove the protectivefilm before use.Attach the side brushes.Fully charge the robot before use. Turn on the robot and start cleaning.Install AAA batteries intothe remote control.Place the charging base on a flat surface against the wall with enough room around.Always keep the charging base plugged in, otherwise the robot will not automatically return forcharging.Quick Start GuideAPP QR CodeFor D5 SeriesFully chargedSolid green

Ultenic D5 Series Quick Start Manual