Ultimate Lock 3000 Series Installation Manual
Also see for 3000 Series: Installation guide
        |
The Ultimate Lock™ 3000 Series Installation Guidea. This lock is designed for a door that opens into the home or office. The lock can be installed on an outwardswinging door, but special instructions are required. Go to the www.theultimatelock.com for details.b. To provide maximum protection, The Ultimate Lock™ should be installed in a solid 1-3/4” thick wood door orsteel-skinned wood-filled door mounted in a double studded door frame.c. If your door does not already have a deadbolt installed, it is highly recommended that you purchase aninstallation jig kit for deadbolts and door handles. These kits include special hole saws, templates, and other aidsto simplify the installation process. If your door has a metal skin, be sure your kid includes a bi-metal hole sawIf your door jamb/frame is steel, do not remove the hinge screws! See step 2. Check www.theultimatelock.com toget information on installing the striker plate on a steel door frame.Congratulations on purchasing the finest deadbolt lockon the market, The Ultimate Lock™. The UltimateLock™ is engineered to be the best deadbolt lock on themarket. It is vital that your lock is installed properly toprovide the maximum protection possible. Read theseinstructions completely before you begin the installation.More information can be found at our website www.theultimatelock.com.• No. 1 and No. 2 Phillips Screw drivers”orNo. 1 and No. 2 bits for an electric screwdriver/drill• Pencil or steel marking pawl• Electric drill (3/8” chuck) with torque adjustment)• Drill bits:1/16"(1.5 mm)3/32" (2.5 mm)1/8" (3 mm)9/64" (3.5 mm)• Spade bit or forester bit: ¾", and 1"• Hammer, steel center punch, and 1/2" and 3/4"chisels• Small carpenter’s square (adjustable)• Pliers (2 pair)• Spray lubricant (WD-40, Silicon Spray, or similar)• Tape measure or 12-inch ruler• (If no deadbolt installed) Wood or bi-metal holesaw: 2 1/8” and 1” wood or bi-metal hole sawEvery Ultimate Lock™ is thoroughly inspected before leaving the factory. It is warranted to be free of defects from workmanship and materials for a periodof TEN YEARS from the date of original purchase. Should any trouble develop during the TEN-year period, return the complete lock system, freight prepaid,to Ultimate Lock, Inc. at 6150 Richmond Avenue, Suite 209, Houston, TX 77057 or call 1-866-MLS-4005 (1-866-657-4005) for one of Ultimate’s AuthorizedService Centers nearest you. If our inspection shows the trouble was caused by defective workmanship or material, Ultimate Lock™ will repair (or at ouroption) replace the lock without charge. Register your Serial Number on line at www. theultimatelocksystems/warranty.com This Warranty does not apply where:• Repairs have been made or attempted by others• Repairs are required because of normal wear and tear• The lock has been abused, misused or improperly installed• Alterations have been made to the lock or its componentsIn no event shall Ultimate Lock™ be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer appliesboth during and after the term of the warranty. Ultimate Lock™ disclaims liability for any implied warranties, including implied warranties of “merchantability”and “fitness for a specific purpose”, after the TEN-year term of this warranty. This warranty gives you specific legal rights, and you may also have otherrights, which vary from state to state. Some states do not allow the exclusion or the limitation of incidental or consequential damages, so the above limitationor exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.*Disclaimer: The Ultimate Lock is only as strong as your door frame. Please contact your local locksmith to visit your home and evaluate your current setup.Before You StartTools You Will NeedA Note About Steel DoorsLimited Warranty |
Related manuals for Ultimate Lock 3000 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine