Ultra PEG+ Installation Manual
  |
Install the second PEG, then leveland tightly secure the PEG set.Repeat for all PEG sets. Use woodscrews if studs are encounterd.Adjust PEGs into the collets. Repeat this step to install theadditional PEG+ sets.ULTRA PEG+ INSTALLATION GUIDEImportant! Before installing Pegs do the following:1. Check the Package Contents for missing or damaged itemsContact Customer Service at 1-800-611-8644 for questions or concernsRecommended Fastner Applications:Drywall anchors (included) - Use for installing rails to drywall if studs are not present inthe desired location. Do not use drywall anchors to secure into a wall stud location.Wood Screws (included) - Use wood screw to secure collars to wall studs or woodpanels, do not use on drywall without securing to a stud. Concrete or Masonryapplications not recommended.Concrete, Brick or Stucco (Not Included) - 3/16” x 1-1/4” Masonry Screwor #8x1-1/4” screw with the proper concrete anchors.Package ContentsRecommended Installation Tools(Not Included)2x pegs 2x Wood Screws 2x Drywall Anchors 2x ColletsPower Drill Power Bit Level Pencil Screwdriver Tape Measure Stud FinderSTEP09STEP11 STEP12STEP10 |
Related manuals for Ultra PEG+
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine