Connecting and disconnecting the interface cableAn audible “click” sound indicates the interface cable has been plugged in correctly and the connector lock is engaged. To unplug the interface cable,release the connector lock by inserting one end of a paperclip into the handle.SETUP AND INSTALLATIONThe following steps will walk you through the installation process.SETTINGS AND CONFIGURATIONThe following section covers the most common configurationsettings for your MS837 scanner.For additional configuration options please visitunitechscanners.com/MS837 and select the “Download” tab.You will find the User’s Manual and a variety of other resources.Open a word processing program such as Microsoft Word or Notepadon your host. Now scan the following barcode:Test & FinishIf the word “Unitech” appears on the screen you have succesfullyinstalled your scanner. Congratulations!MS837 Quick Start GuideThe Unitech MS837 Laser ScannerInstallation Instructions and Popular Configuration SettingsPlug the interface cable into a free USB port of a host computer. TheMS837 is now ready to use.Connecting USB cable to a hostScan this set of barcodes to switch to Flash Mode from the defaultTrigger Mode. In Flash mode, the MS837 will function automatically. Itwill scan at a set interval.Flash ModeContinuous AutomaticScanning12Scan here to switch back to Trigger Mode. In Trigger Mode, the MS837will scan only when the scanner button is pressed.Trigger Mode*(Default scanning mode)Trigger ModeDefault SettingsThis barcode will return your scanner to its original factorysettings, a useful feature for troubleshooting purposes.Enter ModeScan here to return to Enter Mode.Tab ModeYou may wish to set your scanner to “Tab Mode.” In this mode, data willtab over to the next column as you scan instead of jumping to the nextline. Scan the top barcode and then the bottom barcode to switch toTab Mode from the default Enter Mode.12