Unitech MS926 Quick Start Manual

Also see for MS926: User manual Quick start guide Quick start guide Quick start guide User manual

Contents

Unitech MS926 Quick Start Manual Manual pdf 1 page image

MS926 Wireless 2D Pocket ScannerQuick Start GuideVersion 1.0401320GChargingPlug the USB cable into the port on the scanner and into a USB porton the host computer.HostUSBMicro USBScannerTest & FinishOpen a word processing program such asMicrosoft Word or Notepad and scan thefollowing barcode:If the word “unitech” appears on thescreen you have succesfully installedyour scanner.MS926 TIPS●The MS926 should be recognized as ageneric HID device by your host device,similar to a standard keyboard. Thisallows you to scan into any field you couldnormally type into.• If the MS926 is out of wireless range fromthe host device, it will automatically saveany scan data in its buffer memory andautomatically upload the scan data to thehost when back in wireless range.• The MS926 can also operate in BatchMode, where a wireless connection is notrequired. In Batch Mode, the MS926saves all scan data in the internal memoryand then uploads the data whenconnected to a host.Scanner TypeOperation ModeBT HID * BT SPP USB SPPBT SPP (Slave)Wedge Batch Auto *MS926 Pairing* Default OptionFor additional configuration options, please visit www.ute.com to download the user manual and thescanner configuration manager utility.●NFC Pairing with Mobile Devices (BT HID Mode)Step 1. Ensure your mobile device supports NFC and that it is enabled.Step 2. MS926 will automatically enter BT pairing mode. (For firmware versionolder than 2.4, please hold Page Down key and Scan buttonsimultaneously to enter BT pairing mode.)Step 3. Turn both NFC & Bluetooth ® on your mobile device.Step 4. Touch the back of the MS926 scanner to your mobile phone, until thedevice prompts to accept pairing.Step 5. Press ok to respond your Bluetooth ® pairing request.Step 6. MS926 is now connected to your mobile phone.●Pairing with Mobile Devices (w/o NFC)Step 1. Go to your host device settings and turn the Bluetooth ® function on.Step 2. MS926 will automatically enter BT pairing mode. (For firmware versionolder than 2.4, please hold Page Down key and Scan buttonsimultaneously to enter BT pairing mode.)Step 3. The MS926 will appear on your device as “MS926-XXXXXX.”Step 4. Select “MS926-XXXXXX.”Step 5. If you have Bluetooth ® 2.1 or higher,“MS926-XXXXXX” will now appear aspaired. Proceed to “Test & Finish.”Step 6. If you are prompted to enter a pincode, please enter the number “2926”to finish pairing.●Pairing with PC / Notebook (BT HID Mode)Step 1. Open “Devices and Printers” by clicking the Start button and then,on the Start menu, clicking Devices and Printers.Step 2. MS926 will automatically enter BT pairing mode. (For firmware versionolder than 2.4, please hold Page Down key and Scan buttonsimultaneously to enter BT pairing mode.)Step 3. Click “Add a device,” and then follow the instructions.Step 4. Click the Bluetooth ® enabled device (MS926-[XXXXXX]) you want to addto your computer, and then click Next. If you don't see the device you wantto add, make sure the device is turned on and discoverable. If you justturned on the device, it may take Windows several seconds to detect it.

/ 2

Related manuals for Unitech MS926