Unitech MSR 120 SERIES Simple Manual

Also see for MSR 120 Series: Simple manual Programmer's manual

Contents

Unitech MSR 120 SERIES Simple Manual Manual pdf 1 page image

!" MSR120 Simple Manual 2003/1/21MSR 120 SERIESMagnetic Stripe Card ReaderUniversal Serial Bus (USB) InterfaceThank you for purchasing the MSR120 series products. The MSR120 Series USB Interface Magnetic Card Reader is ideal for retailsystems, time keeping systems, security systems and the card reader related systems. The MSR120 series are designed to offer the usera card reader solution that will complement many applications. Triple track MSR120 reader is uniquely designed to read both creditcards and Driver Licenses (AAMVA and California standard).FEATURES1 Light weight: 120g2 Compact size: 100L*34W*28H (mm)3 LED and Buzzer indicators indicate card status4 Low power consumption5 Single, dual, or triple track versions allow for reading all types of magnetic cards, including credit cards and drivers licenses.CONFIGURATIONMSR120-33 Triple track 1&2&3AGENCY APPROVED- Comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules.- Comply with CE mark Class A, UL, and cULWARRANTYThis product is served under one-year warranty of defects in material and functionality to the original purchasers. Within the warrantyperiod, if the product found to be defective will be repaired or replaced. This warranty applies to the products only under the normal useof the original purchasers, and in no circumstances covers incidental or consequential damages through consumers’ misuse ormodification of the product.WARNINGYou are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void yourauthority to operate the equipment.SET-UP1) Turn the system power off.2) Connect PC and MSR120 USB connector of signal cable to a free USB port3) Turn the system power on.4) Install USB driver (ref. to Appendix A)SPECIFICATIONSRecording Method: Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA.Swipe Speed: 5 to 50 in/sec (worst case with +/- 12% jitter card)Power Requirements: 5VDC/120mA!" Excerpt from MSR120 Programmer’s Manual (PM010, Rev.1.1) Page 1 / 5!" --- Proprietary and Confidential ---