Unitronics 1UniStream®HMI PanelInstallation GuideUSP-070-B08, USP-070-C08, USP-070-B10,USP-070-C10, USP-104-B10, USP-104-C10,USP-104-M10, USP-156-B10, USP-156-C10 SCANto downloadUnitronics’ UniStream® platform comprises control devices that provide robust, flexiblesolutions for industrial automation.This guide provides basic installation information for the UniStream® HMI Panel.Technical specifications may be downloaded from the Unitronics website.The UniStream® platformcomprises CPU controllers, HMIpanels, and local I/O modulesthat snap together to form anall-in-one Programmable LogicController (PLC).Expand the I/O configurationusing a Local Expansion Kit orremotely via CANbus.CPU-for-Panel CPUs are Programmable Logic Controllers (PLCs), the heart of theUniStream® platform.The CPU-for-Panel cannot operate independently. It must be pluggedinto the back of a UniStream® HMI panel. The panel provides the CPU’spower source. The CPU-for-Panel comprises:▪ IO/COM Bus connector for interfacing Uni-I/O™ & Uni-COM™ modules▪ Isolated RS485 and CANbus ports▪ Backup batteryHMI PanelsAvailable indifferentdimensionsA high-resolution touch screen provides the operator interface for thesystem and the physical foundation for a PLC+HMI+I/Os all-in-onecontroller.The DIN-rail structure on the panel’s back is designed to physicallysupport a CPU-for-Panel controller, Uni-I/O™ and/or Uni-COM™modules.Each panel comprises:▪ AUX connector to support the CPU▪ 1 audio-out 3.5mm jack▪ 1 microSD slot▪ 2 type A, USB host ports and 1 Mini-B USB device port▪ 2 Ethernet ports, RJ45, 10/100 Mbps▪ 1 power input connector, 12/24 VDCI/O Options Integrate I/Os into your system by using:▪ On-board I/Os: snap onto the panel for an all-in-one configuration▪ Local I/O via a Local Expansion Kit▪ Remote I/O via EX-RC1ProgrammingSoftwareAll-in-one UniLogic™ software, for hardware configuration,communications, and HMI/PLC applications, available as a freedownload from Unitronics web site.