Installation and User GuideCamera and Electronic Products for IntegratorsIINN--WWAALLLL™™ RREECCEESSSSEEDD CCAAMMEERRAA MMOOUUNNTTIINNGG SSYYSSTTEEMMSSRecessed Camera Mounting Systems for Sony®, Polycom®EagleEye®, LifeSize®, TANDBERG® PrecisionHD® PTZ Cameras andVaddio™ EZ Camera™ Interface Module Cable System PackagesFigure 1: IN-Wall Systems (clockwise, left to right), Sony BRC-H700, EVI-D70, TANDBERG Precision HD, LifeSize, SonyBRC-Z700, Polycom EagleEye, Sony EVI-HD1 and Sony BRC-300OVERVIEW:The Vaddio IN-Wall camera mounting systems are an attractive way to mount PTZ cameras on a wallwhere room aesthetics are critical. These mounting systems use the depth of the wall cavity to recess thecamera into the wall, minimizing the camera’s extension into the room and providing a more finished lookto the installation. Cameras from Sony (BRC-H700, BRC-Z700, BRC-300, EVI-D70 and EVI-HD1),TANDBERG (Precision HD), Polycom (EagleEye and EagleEye 1080 HD) and LifeSize were selectedand the camera enclosures were carefully designed and sized to fit the Vaddio EZCamera InterfaceModule (EZIM) in the back of the box to enable use of the Vaddio Quick-Connect CCU and PRO CAT-5cabling systems for applicable cameras (see below). For the EVI-D70, the Vaddio EZ Camera Shoe canbe attached to the back of the camera. Each system consists of an in-wall mounting box and face framewhich are both powder coated white, but can be painted to match any décor.IN-Wall Enclosure Supported Cameras and Part NumbersPart Number Compatible Camera Systems999-2225-012 Sony EVI-D70 , Vaddio WallVIEW 70 System999-2225-013 Sony BRC-300, Vaddio WallVIEW CCU or PRO 300 PTZ System999-2225-014 Sony EVI-HD1, Vaddio WallVIEW CCU or PRO HD1 PTZ System,WallVIEW EagleEye 1080 HD and Polycom EagleEye 1080 HD999-2225-015 Vaddio WallVIEW PRO EagleEye, Polycom EagleEye,TANDBERG Precision HD and LifeSize999-2225-016 Sony BRC-H700, Vaddio WallVIEW CCU or PRO H700 PTZ System999-2225-017 Sony BRC-Z700, Vaddio WallVIEW CCU or PRO Z700 PTZ SystemUNPACKING:Carefully remove the product and all of the parts from the packaging and identify the following parts:• Back Box Enclosure• Camera Platform• Face Frame• Mounting Hardware• Documentation(Camera Not Included)©2008 Vaddio - All Rights Reserved. IN-Wall Enclosures - Document Number 341-744 Rev C