VALERII S&M GROUP K636 User Manual
        |
Проверил: Р.Ч./.05.2017г.www.orgaz.com.trCAMPING STOVE USER MANUAL FOR LPG CYLINDERSIMPORTANT ! In closed areas, ventilate the room from time to time to ensure air circulation. Use this device only as a lamp, do not use it for any other purposes Keep the device away from flammable materials. The accesible parts of the device can be too hot. Keep away from children. Do not ever use the devices with distorted, missing or burnt gaskets. Do not use damaged, malfunctioning devices or devices with gas leakage. Use the device only in open air or well ventilated areas, do not use it inside the house.CAMPING STOVE FOR LPG CYLINDERS(K636 / CK 636) = Burning Intensity 3662. Cal / h(K635 / CK636) = Burning Intensity 3010 Cal / h(K630 / CK630 / K631 / CK631) = Burning Intensity 2020 Cal / h(K625 / K 626) = Burning Intensity 1857 Cal / h(K620) = Burning Intensity 1270 Cal/hHOW TO INSTALL THE CAMPING STOVE Put out all nearby fires before installing the stove tap or the stove which has direct connection to the cylinder and ensurethat the tap button is closed. Check that the tap gasket is in place and intact (it shouldn’t be cracked or ripped, etc), mount the stove tap or the stovewhich has direct connection to the cylinder by turning it to right. After mounting the stove tap or the stove which has direct connection to the cylinder check to ensure that there is no gasleakage in the connections using soap foam. After ensuring that there is no gas leakage, open the gas tap or valve of the cylinder and bring the fire (matches, lighter, ect)near the burner You can open the gas tap or valve of cylinder by turning it towards the plus (+) sign and close it by turning it towards theminus (-) sign Burn the device with a lighter or match. In models with piezo ignition, open the gas tap or valve of cylinder, wait for 3-4 seconds and press the piezo ignition To completely close the gas tap or alve of cylinder, turn it slowly towards the minus (-) sign until it reaches the end.IN CASE OF GAS LEAKAGE DETECTION If there is a gas leakage (gas odour) in your device; Close the gas tap immediately, take the device to open air or to a well ventilated area, If you want to check your device for gas leakage, do it in open air. Do not absolutely light a fire to check for gas leakage or approach the device with fire, use soap foam instead, If bubbles form where you use soap foam, there is gas leakage, turn off the gas tap immediately and inform the dealer.HOW TO LOCATE THE DEVICE The device must be used on a flat floor. Keep it at least 100 cm away from flammable materials, walls or curtains.CLEANING, MAINTENANCE AND STORAGE1312 |
manualsdatabase
Your AI-powered manual search engine