VARIOVISION WVS-16 Manual
Welding camera system WVS-16By semiautomatic or automatic welding equipment the service and control of the welding torchmostly occurs from a control station. To set the position of the welding torch and theparameters for the welding process optimally, however, a visual inspection from the controlstation is required.The welding camera WVS-16 provides a sharp colour picture and allows therefore an optimalobservation of welding torch, filler wire and work piece as well as welding arc and meltingarea. Zoom, sharpness and brightness can be fast and simply adjusted via a small operatingpanel - before, during and after the welding process. This can help you e.g., to shorten thesetup time substantially or faster recogniton of possible welding mistakes.Two storage buttons can be overwritten with new settings by the user at any time.The camera is in a protective case (60x60x130mm) and thereby can be inserted also incramped arrangements with heat and dust load. A protective glass on the front side protectsthe optics of the camera and can be changed easily.The drag chain suitable camera cable can be ordered up to 50 m length. With it, e.g., thecamera can be controlled by a remote control station or a complex cable transfer in themachine can be carried out.Variovision, Pöttinger Straße 23, DE-82041 Oberhaching, www.variovision.tv, info@variovision.tv 1/14WVS-16Version 4.1.1 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine