Vaniman SANDSHELL Original Instructions Manual

Vaniman SANDSHELL Original Instructions Manual Manual pdf 1 page image

SANDSHELL25799 Jefferson Ave.  Murrieta, CA 92562  1-800-VANIMAN (826-4626)  www.vaniman.com  sales@vaniman.comSANDSHELL - 05/21 Page 1CAUTION: Read the instructions before using this equipmentORIGINAL INSTRUCTIONS1. CONDITIONS FOR USEThis micro abrasive blaster may only be operated:• Indoors;• Below 1981 m (6500 ft) above sea level altitude;• Ambient air temperature between 40°-105°F (5-40°C);• Maximum relative humidity of 80% at 31°C (88°F);• Power supply current fluctuations does not exceed 10% of nominal value;• Under level 2 contamination conditions;• Supply cool, dry air only, at a maximum pressure of 10.3 Bar (150 PSI).2. SAFETYWARNING: Read all safety warnings, instructions, illustrations and specifications providedwith this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.Save all warnings and instructions for future reference.The term "power tool" in the warnings refers to your mains-operated (corded) power tool orBATTERY-operated (cordless) power tool.1. Work area safety:a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.b. Do not operate power tools in explosive atmospheres, such as in the presence offlammable liquids, gases or dust. Power tools create sparks which may ignite the dustor fumes.c. Keep children and bystanders away while operating this power tool. Distractions cancause you to lose control.2. Electrical Safety:a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not useany adapter plugs with earthed (grounded) power tools. Unmodified plugs and matchingoutlets will reduce risk of electric shock.b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,ranges and refrigerators. There is an increased risk of electric shock if your body is earthedor grounded.c. Do not expose power tools to rain or wet conditions. Water entering a power tool willincrease the risk of electric shock.d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging thepower tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged orentangled cords increase the risk of electric shock.ENGLISH