A 3/8” dia. wall anchor (concrete only) 4B 5º wedge block (use for tilt only) 1C 200mm LCD wall mount plate 1D #14 x 2” phillips sheet metal screw 4E #14 x 3” phillips sheet metal screw (5º wedge only) 2F 4mm x 20mm phillips machine screw 4G 4mm x 30mm phillips machine screw 4H LCD mounting spacer 4mm i.d. 4I 5mm x 20mm phillips machine screw (gold) 4J 5mm x 30mm phillips machine screw (gold) 4K 6mm x 20mm phillips machine screw 4L 6mm x 30mm phillips machine screw 4M LCD mounting spacer 5mm-6mm i.d. 4N LCD stand off spacer 10mm thick 4PART DESCRIPTION QTYMaximum Flat Panel Weight:100 lbs / 45.5 kgsModel AX2WL01 100/200mm VESAFlat Panel Mount Assembly InstructionsNOTE! Hardware has been included for Wood Stud and Solid Concrete Wall Construction. Hardware is not intended foruse on Metal Stud, Hollow Wall and Cinder Block Wall installation. Preview all steps before beginning. Should any portion ofthese instructions be unclear, contact us directly at 800-582-9595 for assistance. Do not attempt to assemble this Vantage Point100/200mm Flat Panel Mount, if you have any doubts as to its proper assembly and installation. CAUTION - Do not exceed maxi-mum weight indicated. Use with heavier than the maximum weight indicated may result in instability causing possible injury. Useof this product for any other purpose unless specified by Vantage Point Products is not recommended. Think Safety First!WARRANTY INFORMATIONAll Vantage Point Products Corp. products are manufactured to ensuresuperior quality, performance and durability for a lifetime of use . War-ranty covers the product to be free of defects in materials and work-manship under normal and reasonable use. Vantage Point Productswill repair or replace, at our option, any product which proves to bedefective upon our inspection. This warranty will not apply to productsthat have been lost or damaged by misuse, abuse or accident, alteredor repaired in any way or by any person or firm other than specified byus, used in violation of instructions or incorrect assembly nor used ina manner other than specified by us. This warranty is nontransferableto a new owner and may require proof of purchase. All claims mustbe directly handled with Vantage Point Products Corp. by calling us at1-800-582-9595.6i83-05/05Vantage Point Products Corp • P.O. Box 2485 Santa Fe Springs, CA 90670 USAUSA Tel: 1.800.582.9595 • Canada Tel: 905.607.9994 • Europe Tel: 31.72.581.6056Web Site: www.vanptc.com • Email: cons-serv@vanptc.comABCDEFKHIJ MLNG�������������OPTIONAL DOUBLE STUD PLATENOT INCLUDEDHook !NFlat PanelMountingSpacer MountingScrewScrewdriverFlat PanelMountingSpacer MountingScrewScrewdriverFlat PanelMountingSpacer MountingScrewScrewdriver���������� ���������� ���������� ���������� ������������������������������������������������������������������������������������������ �������������������� ���������� ���������� �������������������������������������������������������������������������������� ������������� ���������� ������������������������������������������������������������ �������������������� ��������������������������������������������������� ����������100mm x 100mmVesa Only!Do not overtighten!!5678