Vari Executive Conference Table 4'x10' Manual

Also see for Executive Conference Table 4'x10': Manual

Vari Executive Conference Table 4'x10' Manual Manual pdf 1 page image

Tools Needed (Not Included)• #4 ALLEN WRENCH• PHILLIPS SCREWDRIVER OR POWER DRILL WITH A PHILLIPS DRILLBIT5 or morePeople No ToolsIncludedHolds upto 300lb(136.07 kg)Executive Conference Table 4'x10'TABLESx2ALTERNATECENTER LEG(AIM-A)x2RIGHT LEG(AIM-RIGHT)x2LEFT LEG(AIM-LEFT)x2#12x1 FLAT HEADPHILLIPS SCREWx48The table tops are face down when you open the box. Assemble the table tops adjacent, in both boxes, and as they are toavoid damaging the tabletop surface.1Insert a loosened zipbolt in the holes provided and using an Allen Key turn it clockwise to tighten the zipbolts little by littleuntil they are all secured. *Note: Make sure that the tops are as level as possible when tightening the zipbolts to ensure theyare flushed once fully assembled.2BRACKETSx8#10x5/8 PHILLIPS HEADWOOD SCREWx8VELCRO STRAPSx8VELCRO STRAPPHILLIPS HEAD WOOD SCREW#10 X5/8"CABLECABLE3. FASTEN THE CABLES WITH THE VELCRO STRAP2. PUSH THE VELCRO STRAP INTO THE SLOTS OF THE BRACKET1. SCREW THE BRACKET INTO THE UNDERSIDE OF THE TABLE, IN THE PATH OF THE CABLEBRACKETSVELCRO STRAPPHILLIPS HEAD WOOD SCREW#10 X5/8"1. SCREW THE BRACKET INTO THE UNDERSIDE OF THE TABLE, IN THE PATHBRACKETSCLIPx2ZIPBOLT 100x3POWER BOXx2INCLUDED PARTS FOR TABLE ASSEMBLYINCLUDED PARTS FOR CABLE MANAGEMENTVELCRO STRAPPHILLIPS HEAD WOOD SCREW#10 X5/8"CABLECABLE3. FASTEN THE CABLES WITH THE VELCRO STRAP2. PUSH THE VELCRO STRAP INTO THE SLOTS OF THE BRACKET1. SCREW THE BRACKET INTO THE UNDERSIDE OF THE TABLE, IN THE PATH OF THE CABLEBRACKETSVELCRO STRAPPHILLIPS HEAD WOOD SCREW#10 X5/8"CABLECABLE3. FASTEN THE CABLES WITH THE VELCRO STRAP2. PUSH THE VELCRO STRAP INTO THE SLOTS OF THE BRACKET1. SCREW THE BRACKET INTO THE UNDERSIDE OF THE TABLE, IN THE PATH OF THE CABLEBRACKETSTABLE ASSEMBLY

/ 3

Related manuals for Vari Executive Conference Table 4'x10'