Manual No: 577013-776 l Revision: FTCP/IP Interface ModuleInstallation Guide

Veeder-Root TLS-350 Installation Manual

Contractor Certification Requirements

Safety Precautions

Arrangement of Keys

Blue Key (Maintenance Tracker - TLS-350 Only)

Using the Alphanumeric Keys

Entering Alphanumeric Data

Setup Mode Programming Table

Security Code Enable/Disable

Console

Consoles with CPU Board

Consoles with ECPU Board

Battery Backup

Programming Guidelines

Selecting the System Setup Function

Setting the Date and Time Format

Current Time

Shift BIR Printouts

TC Ticketed Delivery

Periodic Delivery Variance Reports

Periodic Variance Analysis Reports

Disable Tank Periodic Test Needed Warnings

Disable Tank Annual Test Needed Warnings and Alarms

Enable Line Periodic Test Needed Warnings and Alarms

Enable Line Annual Test Needed Warnings and Alarms

Remote Printer Page Eject

Tanker Load Report - International Option

Precision Test Duration (PLLD/WPLLD Only)

Daylight Savings Time

QPLD Monthly Printout - International Option

Maintenance History

Custom Alarm Labels

Table 5-1. Alarm Labels

Service Notice (TLS-350 Consoles Only)

Inventory Alarms Threshold Units

System Beeper

Mass/Density

Alarm Reduction

Selecting the Communications Setup Function

Parity

Dial Type

Setting the Modem Type (international Installations)

Specifying Port Settings for Additional Communication Modules

Auto Delay Time

Phone Directory Setup

Select Modem

Retry Delay Time

Auto-Dial Setup

Auto Dial Method: All Phones/Single Phone

Auto-Dial Frequency: Annually

Auto-Dial Frequency: Monthly

Auto-Dial Frequency: Daily

Continue Communications Setup

In-Tank Alarms

Remaining Alarm Groups

Wire C.L. Sensor Alarms

Wireless Pressure Line Leak Detector (WPLLD) Alarms

Setting Up Auto-Dial Alarms for Additional Destinations

Table 6-2. Alarm List

Selecting the In-Tank Setup Function

Product Labels

Coefficient of Thermal Expansion

Tank Density

Tank Diameter

Procedure

or 20 Point Tank Profiles Height/Volume Entries

Point Tank Profile Entries With Tank Chart Security Enabled

Meter Data Present

End Factor

Float Size

Water Warning

High Water Limit

Programmable Minimum Water Threshold

High Product

Leak Alarm Limit

Entering the Tank Tilt Value

Probe Offset

Line Manifolded Tank Status

Leak Minimum Annual

Periodic Test Fail

Periodic Test Averaging

HRM Reconciliation Warning Limit (International Option)

Delivery Report Delay Time

Selecting the In-Tank Leak Test Setup Function

Leak Test Frequency

Annual Test

Weekly Test

CSLD - Option

Gross Test Auto-Confirm

Leak Test Duration

CSLD Report Only

TLS-350 Series

Product Marking Information

safety warnings

safety symbols

Available Kits

Overview

Field Assembling Vac Sensor/Vac Float modules

Figure 3. Attaching four Vac Sensors/Floats to the housing

Figure 4. Vac Sensor/Vac Float tubing connections

Installing Vac Sensor Housing Support Bracket

Attaching Vac Sensor Cables and Tagging Vac Sensor/Vac Float Pairs

Installing Vac Sensor Housing onto Support Bracket

Vacuum Connections to a Double-Wall Vapor Return Line

Vacuum Connections to a Double-Wall Fiberglass Tank

Vacuum Connections to Siphon Port of the Pump

Field Wiring Vac System Connections

Figure 14. Field wiring connections

Connecting Vac Sensor Field Wiring to TLS Console

Figure 17. Connecting Pump Sense & 4-Relay Modules - Red Jacket Pumps

Disable Extended Run Feature in the Pump Controller

ATM Pressure Sensor Setup

Vac Sensor Setup

Performing Vac Sensor Setup

Vacuum Integrity Test Prior to Filling Tank (Optional)

Running a Manual Test

Figure 19. TLS Console Vac Sensor Manual Test

Figure 20. TLS Console Vac Sensor Evac Hold Procedure

installation guide

Safety Warnings

Removing The Existing Console

Mounting The Console

Installing Comm Modules

Figure 1. TLS-450PLUS Console Dimensions And Designated Conduit Knockouts

Figure 2. TLS-450PLUS Console - Plug-In Module Bays

Connecting The Power Wires To The Console

Figure 5. Wiring AC Power To The TLS-450PLUS Console

For Sites Without Wireless 2 devices

Module/Connector Positions

Figure 1. CPU/ECPU Boards - Battery Backup Switch in On Position

Connecting Sensor Wiring to Modules

Figure 3. Type A Interface Module Wiring Diagram

Figure 4. Interstitial Sensor Interface Module Wiring Diagram

Figure 6. Vapor Sensor Interface Module Wiring Diagram

330020-424

330020-425

TLS-300/ProPlus

TLS-350/ProMax