Operating InstructionsVibrating level switch for liquids withextreme process temperatures andpressuresVEGASWING 66- transistor (NPN/PNP)Document ID: 43757

Vega VEGASWING 66 Operating Instructions Manual

operating instructions

VEGASWING 66 • - two-wire

Function

For your safety 2.1 Authorised personnel

Safety label on the instrument

Configuration

Principle of operation

Storage and transport

Mounting 4.1 General instructions

Mounting instructions

Connecting to power supply 5.1 Preparing the connection

Wiring plan, single chamber housing

Setup 6.1 General information

Adjustment elements

Function chart

Proof test (WHG, SIL)

Maintenance and fault rectification 7.1 Maintenance

Exchanging the electronics

Dismount 8.1 Dismounting steps

Supplement 9.1 Technical data

Dimensions

VEGASWING 66

VEGASWING 66 • Relay

Connection procedure

Function table

How to proceed if a repair is necessary

Industrial property rights

Instrument version

Planning 3.1 Safety function

Safety-related characteristics 4.1 Parameter according to IEC 61508

Setup 5.1 General information

Diagnostics and service 6.1 Behaviour in case of failure

Proof test 7.1 General information

Test 2 - with filling or dismounting of the sensor

Document language

Scope

Planning

Safety-related characteristics

Supplementary information

Setup

Diagnostics and servicing

Proof test

Test 2: With filling or dismounting of the sensor

Appendix A: Test report

Appendix B: Term definitions

Supplement C: SIL conformity