Version 0.1 23 September 2005 Page 1 of 41For use with Vega 50 FXS – SIP version 04.02.07 T014 or greater. © 2002-2005 VegaStream Ltd.This document describes how to configure the Vega 50 FXS SIP unit using the web browserinterface. The configuration described here will allow the Vega to be rapidly installed and tested.The instructions below will configure the Vega 50 FXS to operate as follows:• Calls made by any of the attached analogue phones will be routed to the SIP proxy; theVega will pass on any dialled digits• Calls received from the SIP proxy must have a 2-digit “dialled number”, 06 to 13, toidentify which of the 8 telephones to ring. (The translation of the telephone number to the2-digit dialled number is carried out in the SIP proxy as the Vega registers the 2-digitdialled numbers against the user access numbers (registered addresses).)Initial configurationVega 50 FXS (SIP) – R7.0SIP ProxyLAN…Vega 50 FXSPOTS Telephones55501Unit1Port1Vega50Contact: 0655502Unit1Port2Vega50Contact: 0755508Unit1Port8Vega50Contact: 13