WUNDER SA.BI.SRL USER MANUALVT30/60- VT1- VT2 REV.08 04/12/2016 1www.wunder.itELECTRONIC SCALE MOD. VT30/60- VT1- VT2User ManualRead this manual carefully before using the instrumentVT30 / 60 VT1 VT2 Verify that the input voltage printed on the AC Adapter and the plug type matches the local AC power supply. Make sure that the power cord does not pose a potential obstacle or tripping hazard. Disconnect the scale from the power supply when cleaning the scale. Do not operate the scale in hazardous or unstable environments. Do not immerse the scale in water or other liquids. Do not drop loads on the platform. Use only approved accessories and peripherals,as available. Operate the scale only under ambient conditions specified in these instructions. Service should be performed by authorized personnel only. It must not be bump against other items or overloaded with excessively heavy weights (The load must not exceed themaximum capacity of the balance). Give a warm-up for 30mins before using the scale.