MF003WARNINGUSE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.If you do not understand these directions, or if you have any doubts about the safety of the installation, please call aqualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation maycause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrectassembly or inappropriate use.SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:Triple Monitor Desk Mount75x75\100x100INSTALLATION MANUAL1-844-SATTLER (18447288537)support@walielectric.comwww.walielectric.com(10kg/22lbs)x3RATEDMAX 27”TIPOVER WARNING● NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.● USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.Supplied Parts ListVESA Plated (x3)Nuth (x3)M5x14 Bolte (x3)Support Platej (x1)Spring Washerl (x1)M10 Washerk (x1)M10 Bolti (x1)Grommet Base Platem (x1)Wire Clipn1 (x2)Wire Clipn2 (x4) M4 Spacers (x12)M4x30 Boltr (x12)Wrenchp (x1)M4x12 Boltq (x12)Monitor Armc2 (x1)Lower Polea (x1)Allen Keyo (x1)Weighted Baseb (x1)ea1oInstall the Pole a to the weighted Base b using 3pcs M5x14 Bolts e , and tighten with the Allen key 3mm o .1This step is depending on your personal preferenceTo provide stability for a heavier monitor, we may recommend install the mount to the hole in your desk.ikjpla1 bboe0.4‘’-3’’b: Self-drilled Hole InstallationOption A: Free Standing Installation (Using V-vase)aExisting Grommet Hole Installationikjplø 10m0.4‘’-3”m(ø ")3/8OR√Swivel Armc1 (x1)