Quick Start GuideWatchGuard® APAP432Ceiling Mount BracketsWall Mount ScrewsSpacersACTIVATE YOUR APGO TO:watchguard.com/activate1(9/16" T-Rail) (15/16" T-Rail)CEILING MOUNT Plug one end of the Ethernet cable from your network intothe LAN PoE+ port on the bottom panel of the AP. Make surethe other end of the Ethernet cable is connected to yournetwork through a hub, switch, or injector with PoE+(802.3at) power enabled.Use the included spacers if you mount to awall with the 15/16" bracket attached to theaccess point.PoE+Access Point connected to PoE+ InjectorAccess Point connected to switch with PoE+ powerWALL MOUNTMOUNT THE AP CONNECT THE AP32

Watchguard AP432 Quick Start Manual