Water Witch 217 Installation Instructions Manual
  |
Water Witch, Inc. 10744 Rockvill Street, Suite 103 Santee, California 920711-800-654-4783 e-mail: info@WaterWitchInc.com www.WaterWitchInc.com• No moving parts & no electrolysis• Impermeable to all bilge substances• Activates when water touches lower sensor• Will not interfere with other electronics• Will not pump a bilge full of pure gas, diesel or oil• Easy to install and mounts at any angle• 30” lead of 16 gauge tinned copper wire• 7 year unbeatable limited warranty• Exceeds both United States Coast Guard and U.L. StandardsFEATURES & BENEFITSPower Required: 12Vdc (model 217, 230)24/32Vdc (model 230-24)Power used: .006 AmpsSize: 2⅝”W x1⅝”H x 1⅝”DWeight: 4 ouncesDelay on: 6-8 secondsDelay off: 15 secondsCapacity: 217 10 amps @ 12 Vdc230 20 amps @ 12 Vdc230-24 15 amps @ 24 VdcSPECIFICATIONSInstead of an unreliable and short-lived mechanical float switch, why not use the original ElectronicBilge Pump Switch? The Water Witch 217, 230 or 230-24 is a submersible electronic bilge pumpswitch allows boat owners to forever rid themselves of the archaic outdated float switch. The 230 hasno moving parts, requires no adjustments and works in an oily bilge. This eliminates the chance ofyour battery dying or your pump burning out because of a failed mechanical switch. Water need onlytouch the lower sensor for 6-8 seconds to activate the switch. The delay eliminates pump stutter andonce water has left the sensor, the switch continues to run the pump an additional 14 seconds toclear the output hose. Temperature, humidity or electrical noise will not effect this switch, nor will itinterfere with other electronics. This switch comes with an unprecedented 7 year limited warrantyand is in use by both the Canadian and U.S. Coast Guards. If it's good enough for them,......why notfor you?Models 217, 230, 230-24Electronic Bilge Pump Switch |
manualsdatabase
Your AI-powered manual search engine