Watt Stopper DT-200 Installation Instructions Manual

Contents

Watt Stopper DT-200 Installation Instructions Manual Manual pdf 1 page image

DT-200version 3Dual Technology • Low VoltageOccupancy Sensorwith Light Level, Isolated Relay and Manual On featuresSPECIFICATIONSVoltage ............................................................................. 18-28VDC/VACCurrent Consumption ..................................................................... 25mAPower Supply .................................................WattStopper Power PacksIsolated Relay Rating ..................................................... 1A @30VDC/VACOperating Temperature ................................... 32° to 131°F (0° to 55°C)Light Level One-Step Adjustment ...................................10FC to 200FC)Time Delay Adjustment................................... 30 seconds to 30 minutesWalk-Through Mode ..................3 minutes if no activity after 30 sec.Test Mode ...................................................5 sec. or DIP switch resetPIR Coverage (Typical) ................................................................ 1000 ft2Sensitivity Adjustment ....................High or Low (DIP switch setting)Ultrasonic Coverage (Typical) .............................................. 800-1200 ft2Sensitivity Adjustment .................... Minimum to Maximum (trimpot)Frequency ................................................................................. 40kHzInstallation InstructionsSanta Clara, CA 95050