IS-FZSensor-BMS/IMSInstallation InstructionsWatts BMS/IMS FreezeSensor Connection KitRead this Manual BEFORE using this equipment.Failure to read and follow all safety and use infor-mation can result in death, serious personal injury,property damage, or damage to the equipment.Keep this Manual for future reference.You are required to consult the local building and plumbing codes priorto installation. If the information in this manual is not consistent withlocal building or plumbing codes, the local codes should be followed.Inquire with governing authorities for additional local requirements.Freeze sensor solely provides alerts about a possible freeze eventand cannot prevent a freeze event from occurring. User action isrequired to prevent freeze conditions from causing product and/orproperty damage.Use smart and connected sensor technology on newand existing installations to monitor temperature nearingthe freezing point. With the BMS/IMS Freeze SensorConnection Kit, the activated sensor relays a signal toa building or an irrigation management system, helpingfacility personnel take preventive action to reduce oreliminate equipment replacement and repair. Freeze alertsare distributed according to the BMS/IMS application.NOTICEUse of the freeze sensor does not replace the need to complywith all required instructions, codes, and regulations relatedto installation, operation, and maintenance of this product,including the need to provide protection against a freeze event.Watts is not responsible for the failure of alerts due toconnectivity or power issues.