SIM7600CE-T/E-H/A-H/G-H 4G ModulesIntroduction4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600E-HOverview:This is a 4G/3G/2G communication and GNSS positioning module designed for Jetson Nano, itsupports global LTE CAT4 up to 150Mbps for downlink data transfer, with pretty low powerconsumption.Just attach it onto the Jetson Nano Developer Kit, easily enable functions like 4G high speedconnection, wireless communication, remote video monitoring, making telephone call, sendingSMS, global positioning, and so on.Features:1. 40PIN GPIO extension header for connecting Jetson Nano2. Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.3. Supports GPS, BeiDou, Glonass, LBS base station positioning4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on5. Breakout UART control pins, to connect with host boards like Arduino/STM326. SIM card slot, supports 1.8V/3V SIM card7. Onboard 3.5mm audio jack with earphone and mic support, for making telephone call8. 2x LED indicators, easy to monitor the working status9. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper10. Baudrate: 300bps ~ 4Mbps (default: 115200bps)11. Autobauding baudrate: 9600bps ~ 115200bps12. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)13. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT14. Comes with development resources and manual (examples for Jetson Nano/RaspberryPi/Arduino/STM32)Communications Specifications:LTEWCDMA /TD-SCDMA /CDMA 2000EDGE GSM/GPRSBand LTE-TDD UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19 GSM/GPRS/EDGE