Help and Comments www.waybasics.com/help Share and Win www.waybasics.com/shareImportantTip Start assembly from bottom to top.DO NOT place unit on its side or back asit will compromise its structural integrity.THIS SIDE UPWARNING: CHOCKING HAZARDSmall parts NOT for children under 3 years1 Backer Board4 holes for pins2 Horizontal zBoards2 Vertical zBoards6 holes for pins16 PinsIncludedBLOX CUBE• Assemble your unit on a flat even surface, carpet not recommended• Furniture is for indoor use only• When moving your Way Basics furniture, lift from the bottom• Make sure zBoard surfaces are clean and dry1 23 4Place alignment pins invertical zBoards and backboard.Start with the bottom horizontalzBoard. Align vertical zBoards andbackboard to holes in the horizontalzBoard.Align horizontal zBoard and pressfirmly to secure unit together. Visit linksbelow for more details.Enjoy building possibilities!Carefully remove the 3Mprotective layer from adhesive.