Wayne Classicdrive 3014 Owner Installation And User Manual
                                        | |
OWNER INSTALLATION ANDUSER MANUAL Series 3000Models: 3014, 3018, 3018DLX & 3514Automatic Garage Door OpenerFor Sectional Overhead Residential Doors OnlyDO NOT USE ON ONE PIECE DOORSCONTENTSImportant Installation Instructions 2 Infrared Safety Sensor Obstruction Test 25Features 4 Wireless Keyless Entry Installation 26Door Tests 5 Opening & Closing Force Adjustment 27Tools You’ll Need 6 Contact Obstruction Sensing Adjustment 28Part Identification 7 Mechanical Lock Adjustment 28Hardware Identification 8 Operational Safety Rules 29Rail Assembly 9 Operation Of Your Opener 30Installation Instructions 11 Emergency Release Disconnect 32Installing Wall Station 13 Maintenance Schedule 33Installing Infrared Safety Sensors 15 Trouble Shooting 34Wall Station Code Change & Programming 19 Parts Breakdown - Rail 35Infrared Safety Sensors Alignment 20 Parts Breakdown - Power Head AssemblyAnd Accessories36Transmitter’s Code Change & Programming 21 Accessories 37Travel Adjustment 25 Warranty 39Obstruction Sensing Test 24 Customer Service Number 40© Copyright 2003 Wayne-Dalton Corp. Part No: 307532 Rev3 10/15/03DOOR AND OPENER WILL NOT OPERATE PROPERLY UNTIL INFRARED SAFETYSENSORS ARE INSTALLED AND PROPERLY ADJUSTED! DO NOT OPERATE DOOROPENER UNTIL FULLY INSTALLED, ADJUSTED & INSTRUCTED TO DO SO!READ THE ENCLOSED INSTRUCTIONS CAREFULLY BEFOREINSTALLING/OPERATING THIS OPENER! PAY CLOSE ATTENTION TO ALLWARNING LABELS AND NOTES. THIS MANAUL SHOULD BE ATTACHED INCLOSE PROXIMITY TO THE GARAGE DOOR OPENER. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine