Wayne HS Manual

Also see for HS: Manual

WAYNE COMBUSTION SYSTEMS801 GLASGOW AVE.FORT WAYNE, IN 46803PHONE: (260) 425-9200(800) 443-4625FAX: (260) 424-0904HSOilBurnerManual: 21663Revision 15Publication Date: 7/26/2011Firing Capacity:70,000 – 420,000 BTU/HR0.50 – 3.00 GPH(additional hardware required to fire above 2.50 GPH)Electrical:Power Supply..............115V / 60Hz / 1-PhaseMotor...............................................3450 RPMIgnition...................................10,000V / 23mAFuels:No.1 or No.2 heating oil, diesel, B5, kerosene,or JP8 Jet FuelDimensions (Standard):Height.....................................................12 ½”Width......................................................12 ⅞”Depth........................................................7 ¾”Center Line of Tube to Floor.........................7”INSTALLATION OF BURNERINSTALLATION OF THE BURNER MUST BE DONE BY A QUALIFIED INSTALLER IN ACCORDANCE WITH REGULATIONS OF THE NATIONALFIRE PROTECTION STANDARD FOR OIL-BURNING EQUIPMENT, NFPA NO. 31, AND IN COMPLETE ACCORDANCE WITH ALL LOCAL CODESAND AUTHORITIES HAVING JURISDICTION.INCORRECT INSTALLATION, ADJUSTMENT, OR MISUSE OF THIS BURNER COULD RESULT IN DEATH, SEVEREPERSONAL INJURY, OR SUBSTANTIAL PROPERTY DAMAGE AND WILL VOID THE WARRANTY.A QUALIFIED INSTALLER IS THE PERSON WHO IS RESPONSIBLE FOR THE INSTALLATION AND ADJUSTMENT OF THE EQUIPMENT ANDWHO IS LICENSED TO INSTALL OIL-BURNING EQUIPMENT IN ACCORDANCE WITH ALL CODES AND ORDINANCES.THESE INSTRUCTIONS SHOULD BE AFFIXED TO THE BURNEROR ADJACENT TO THE HEATING APPLIANCE.