Woodland MEMPHIS Assembly Instructions Manual

Woodland MEMPHIS Assembly Instructions Manual Manual pdf 1 page image

W1W19Z31W202. Wooden parts, if necessary, can be treated with natural wax or oil before the assembly of the bed.Advice: We advise you not to treat the bed to sustain better environment for children (regulating humidity in the air). In addition it saves wax and oil costs andoffers advantage that it is easier to clean with tissues and cloth. Two further benefits: Untreated wood is easier for children to take a grip on handles and thenatural colour of the wood stays longer.3. For the assembly of the bed you need the following tools: a ratchet with a size ten socket, a cross-end screwdriver (better yet acordless screwdriver with a changeable head and size ten ratchet attachment) and a hammer. Assistance is only necessarywhen assembling the corner beams of the bed.1. Please take a moment to see how everything fits together by using the diagram above. All the important building parts havelabers to help you see how they fit into the overview. Please note that there is a separate beam list as an additional assembly aid.All beams are shown horizontally or vertically as they should be positioned and assembled together. The labels on the packagesLets begin:Assembly Instructions MEMPHIS Post. 506B1-B16Z30 Z30Z32Z32Z31 Z31W13 W2W14 W1F2F3F1W19W20W9W8Not all specifications are guaranteed. © Copyrights by WOODLAND 19981.1.Z30 Z30Z31Z31W14W1W19W82.2.W1Z31Z31Z32Z32Z30 Z30W8W19W2W14W20W9W13110mm flathead boltStart the assembly of the bed with the horizontal beams W1, W8, W14 and W19 (W = horizontal, S =vertical).CAUTION! All horizontal beams (W1, W2, W8, W9) are built in a way that the side with mostround indentations (= ), face inside and the surface with two round indentations faceunderneath!The labels as shown ´in , can be found on the end of each beam. Position the beamson the floor so that you can still walk around the bed while it is in the building phase .The surface of beam W13 with round indentations should face the inner side.During the beam assembly install the flathead bolts from outside to inside. From the inside screw asize 6 flange nut using a screwdriver with size 10 attachment. But do not over tighten bolts.diagram1.1diagram1.11.1.16mm 35mmscrews110 mmflathead boltflange nut M6Rflangenut M6

/ 2

Related manuals for Woodland MEMPHIS