WorldStart General Instructions Manual
   |
General Memory Card Reader EasyGuide by WorldStartThough the specific memory card reader you purchased may be different (different size, number ofcards it can read) all the basic functionality works the same.InstructionsStep 1) Remove the card reader from the packaging (optional: If USB cable is not attached to the cardreader, attach the USB cable to the USB mini port) and locate an empty USB port on your computer.Step 2) Turn on your computer and allow the operating system to load completely.Step 3) Plug the USB card reader into the empty USB port you located in step 1.Step 4) Allow your operating system 2-3 minutes to detect and install the card reader. All modernoperating systems include drivers for card readers (Windows XP, Vista, 7, 8, Mac OS, Linux) so a driverdisk is not needed.Step 5) Insert a memory card into the memory card reader. A new drive will appear in your MyComputer (Windows XP) or Computer (Windows Vista, 7, 8) showing the files on the memory card. Ifyou feel resistance placing the memory card in, try flipping the memory card upside down andreinserting.To easily tell which drive letter your memory card is on, simply open My Computer or Computer beforeplugging the memory card in to the reader and take note of which drive appears or changes name.Please refer to the reference photos below. Your memory card reader may look different due to brandand cards accepted. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine