Page 1OS/2 Warp 4.0 (NetBEUI) Peer-to-Peer Network Quick Install CardXerox Document Centre 240/255/265 LP/STb) On the keypad enter 1111 or thecurrent password. Press the Enterbutton when finished. If your printer isan ST model press the Go to Toolsbutton, otherwise skip to the next step.c) The Touch Screen will be used for theremainder of the data entry.3. Enable Microsoft Network printing.a) Press the Connectivity and NetworkSetup button.b) At the next screen, press the NetworkSetup button.4. Enable the Protocol and Mediaa) At the next screen, press theMicrosoft Networking button.b) At the next screen, press theTransport and Media button.c) At the next screen, press the Enablebutton to enable the Microsoft Networkprotocols.d) Once enabled the Physical Mediaportion of the screen will appear.Press the corresponding button toselect one of the following, NetBEUI/Ethernet or NetBEUI/Token Ring.After making your selection pressSave.5. Assign the Workgroup and Host Names.a) You will be returned to the previousscreen, press the Workgroup andHost button.b) At the next screen, press theWorkgroup Name button. Using thetouch panel keys, enter the name ofthe workgroup in which you want theprinter to appear then press Save.c) You will be returned to the previousscreen. Press the SMB Host Namebutton, using the touch panel keys,enter the desired text for this item thenpress Save.d) OPTIONAL STEP: Press the SMBHost Description button, enter thedesired text then press Save. You willbe returned to the previous screen.e) Press Save again to return to theprevious screen.Before You StartIf your printer is equipped with a Token Ringinterface, use the Token Ring Quick InstallCard supplied in this Quick Install Card set toset the Ring Speed and Source Routing settingsfor your environment.Record the following informationNetwork Interface Type ___________________Workgroup Name _______________________SMB Host Name ________________________Printer Name ___________________________OPTIONAL INFORMATION:SMB Host Description ____________________Printer Description _______________________Go to the printer and...1. Connect your Document Centre to thenetwork with the appropriate cabling.2. Enter the Tools pathwaya) Press the Access ( )button.For assistance, contact your local Xerox Customer Support Center:USA: 1-800-821-2797 Canada: 1-800-939-3769