Phaser® 5500 Laser PrinterCopyright © 2004 Xerox Corporation. All Rights Reserved.A-1Your printer and the recommended supplies have been designed and tested to meet strict safetyrequirements. Attention to the following information will ensure the continued safe operationof your printer.Electrical Safety■ Use the power cord supplied with your printer.■ Plug the power cord directly into a properly grounded electrical outlet. If you do not knowif an outlet is grounded, ask an electrician to check the outlet.■ Do not use a ground adapter plug to connect the printer to an electrical outlet that does nothave a ground connection terminal.■ Do not use an extension cord or power strip.WarningAvoid the potential of electrical shock by ensuring that the printer is properly grounded.Electrical products may be hazardous if misused.■ Do not place the printer in an area where people might step on the power cord.■ Do not place objects on the power cord.■ Do not block the ventilation openings. These openings are provided to prevent overheatingof the printer.■ Do not drop paper clips or staples into the printer.WarningDo not push objects into slots or openings on the printer. Making contact with a voltagepoint or shorting out a part could result in fire or electrical shock.If you notice unusual noises or odors:1. Turn off the printer immediately2. Disconnect the power cord from the electrical outlet3. Call an authorized service representative to correct the problem.User Safety