Xomax XM-DTSB913 Installation And Owner's Manual

INSTALLATION/OWNER’S MANUALDVD Multimedia Receiver with 7” Touch Screen DisplayXM-DTSB913-4- -5- -6- -7- -8-Theunit can play the following discs onlyNote: The unit is compatible with DVD, DVD+/-R, VCD 1.0/2.0/3.0, SVCD, CD, CD-R, CD-RW and JPEGCLASS 1 LASER PRODUCTLaser porDuct symbol: located on the rear panl of the unit, indicate this player is a class laser product, onlyuse weak laser and on hazardous radiatian outside of the unit.● Read through this instruction manual before installation and use.● Do not touch the power plug with wet hand.● Switch off the main power when the unit is not in use. (Disconnect the power pulg from the power outletwhen you do not intend to use the unit for a prolonged period of time). Before moving the unit, remove thedisc from the unit/tray first.● Do not open the cover or touch any of the components exposed out of the unit, only for qualifiedtechnicians.● Do not expose the unit under direct sunlight oe nearby objects that radiate heat to avoid damaging the unit.● Do not place the unit in moist and humdi conditions.● Place the unit on a flat surface and ventilative condition, place ensure the ventilation holes are not coveredto avoid overheating acd malfunciton.● Clear the panel and case with soft dry cloth only, do notaooly any kind of thinner, alcohol or sprays.● The apparatus shall not exposed to dripping or splashing and that no objects filled with liquids, such asvases shall be placed on the apparatus.1. TFT-LCD Display2. Disc Slot3. AV IN Insterface4. 2/OSC Button5. 1/PAUSE Button6. 3/MENU Button7. 4/REPEAT Button8. Fast Forward Button/Previous Track9. Fast Reverse Button/Next Track10. 6/+10 Button (CD MP3 VCD) Manual Tuning11. Disc Lamp12. 5/-10 Button (CD MP3 VCD) Manual Tuning13. Audio Volume/SEL Button14. BAND (OFF Phone) Button15. LCD Display16. Release Key17. OPEN Button18. EJECT Button19. Power/TFT ON/OFF (OFF) Phone Button20. USB Socket21. SD Card SlotPrecautionsReplace the BatteryWhen the operational range of the remote control becomes short or non-functional, replave battery with anew CR2025 battery. Check the battery polarity before replavement.Replace the Battery of IR HandsetNotes on installationContents-3-Control Panel Layout Remote Control Layout Wiring Diagram Basic OperationAUX&IPOD Operation-9-Multimedia Playing Setup (system setup menu)Multimedia Playing Setup (system setup mode)-10- -11-Initial System Starts UpTurning the Unit ON/OFFVolume ControlMute FunctionMenu FunctionDisplay SetupAudio SetupIR SensorPress RESET button with a pointed object to set the unit to its initialprocedureShort press Power to turn on. Long press to turn offPress VOLUME+/-Press MUTEPress MenuClick icon to access the SystemDefault setupClick icon to access the EQsetupReveiver for wireless IR remote controlRadio Operation1. Touch the radio icon in the main menu display screen to select radio mode.2. Touch the icon “BAND” repeatedly to select bands.3. Touch the icon “APS” or press key in IR handsct shortly to activatc automatic memory storingfunction.4. Press or or icon shortly to manually seek the radio station.5. Long press or or icon to automatically seek the radio station.6. Touch the frequency bar in the display screen to select preset memory station.7. Long press icon “APS” to scan each preset memory station for 10Seconds.8. Touch the icon “ST” or Press ST key in IR handset to set stereo or mono receiving mode.-12- -14-Install the unit (DIN front mount)-15- -16-DIN FRONT-MOUNT (method A)SpecificationDIN REAR MOUNT(method B)-17-Install and Remove the Front Panel-13--2-Note on installation -------------------------------------------------------- 3Precautions ------------------------------------------------------------------ 4Control Panel Layout ------------------------------------------------------ 5Remote Control Layout --------------------------------------------------- 6Wiring Diagram ------------------------------------------------------------- 7Basic Operation ------------------------------------------------------------ 8Multimedia Playing Setup ----------------------------------------------- 9Replace the Battery of IR Handset ----------------------------------- 13Install the unit -------------------------------------------------------------- 14Specification ---------------------------------------------------------------- 16The unit is designed for 12V DC, negative ground operation systems only. Before installing the unit, makesure your vehicle is connected to 12V DC negative grounded electrical system.The negative battery terminal must be disconnected befor making connections which can prevent damage tothe unit from short circuiting.Be sure to connect the correct speaker to the correct terminal. Never connect the left and right channelspeaker cables to each other or to the vehicle body. Do not blovk vents or radiator panels. Doing so willcause heat to build up and may result in fire.After completion of installation and replacement of battery, press the reset button on the front panel with apointed object (such as a ball point pen) to set the unit to its initial status.1. Press SETUP key in IR handset in the stop mode when playingmultimedia.2. The main page of setup menu is displayed.3. Select the preferred item by using the arrow keys.4. Press ENTER key to confirm setting.Enter Setup ModelSelet restore to restore initial factory settings.This setuo page includes OSD language. Audio language and MenuLanguage features.This setuo page includes all the items for AUDIO.SPDIFOFF:Analog or optical outout port has no output signalatall.SPDIF RAW:When the player is connected with the power amplifier by the analog orpotical oore, please select this item when the playing disc is recoreded inDolby Digital, DTS or MPEG.The analog or optical output signal of theunit will be the same as the digital signal(RAW format) of the playingdisc. The power amplifier function must be set as Dolby Digital, DTS orMPEG.SPDIF PCM:Select this when the player is connected whit the 2 channels, digitalseereo amplifier. If the disc is recorede in Dolby Digital or MPEG, theanalog optical output will be modulated to 2 channels.This is to select Treble or Bass according to yourNeeds.This is for the user to set Brightness, Contrast, Hue and Saturation of thepicture by pressing the left right arrow buttons.This setup page includes all the items for VIDEO.Default SetupMenuLanguage SetupAUDIO SetupAudio Out SetupKey Setup MenuVideo SetupOperating Current: 600MAOperating Voltage: DC: 10V-15.7VMax. Power Output: 45W*4CHRated Power: 1WDimensions: Approx. 182*160*53mm (D*W*H)Mounting Dimensions: Approx. 160*180*50mm (D*W*H)Signal Amplitude: 1VRemote Contro: IR/IR ReceiverPOWER IC: TDA7388Decoding IC: SHE8202TQScreen drive IC: MST-703Colour: Black Front Panel/White Text Pringting Button/Yellow Text PriningDisc played: Multi MediaVideo System: Auto/PAL/NTSCMounting Angle: 0-30 degreeViewing Angle: 60/60/40/60 (TYP)Operating Temperature: +50-20°Storage Temperature: +80-40°Screen Size: 164.9MM(W)*100(H)*5.7MM(D) 7″Colour ScreenViewing Angle: 60/60/40/60(TYP)Screen Resolution: 480(W)*3 (RGB)*234(H)Screen Brightness: 350cd/m2RCA Maximum Output: 520MVFrequency Response: 20Hz-20K HzSignal to Noiseration: 85dBSeparation: 80dBAUX Input: 750MVGeneralMulti MediaDeek SectionVideo SectionAudio SectionTuning Range: 87.5-107.9MHzIF Range: 10.7MHzUsable Sensitivity (-30dB): 12dBuSignal to Noiseratio: 60dBStereo Separation: 30dB (1KHz)Frequency Response: 30-15KHzFrequency Range: 530-1710KHzIF Range: 450KHzUsable Sensitiveity (-20dB): 25dBuFM Tuner SectionAM Tuner Section1. Press the icon to enter main menu display screen.2. You can touch icon”AV-IN” to switch to your desirde av-in mode.AV-IN OperationRating 1 :[KID SAFE]Select this for kid-safe viewing programs.Rating 2:[G]Select this to allow admission to persons of all ages.Rating 3:[PG]Select following when children under 13 are forbidden to view.Rating 4:[PG13]Select following when children under 13 are forbidden to view.Rating 5:[PG-R]Select this when PG-R is printed on the DVD disc.Rating 6:[R]Select this when children under 17 are forbidden to view.Rating 7:[NC 17]Select this when children under 17 are forbidden to view.Rating 8:[ADULT]Select this ti only allow admission to all adults.Rating SetupMenuThe setup page includes TV system, screen saver, TV type, password,rating&default features.This player can play discs recorded in either PAL or NTSC format. SelectNTSC format when you are connected to NTSC TV. Select PAL formatwhen you are connected to PAL TV. If you select AUTO, according toyour disc content.1. 4:3 PSPlayback in the PAN&SCAN style. (If connected to widc-screen TV, theleft and right edges are cut off).2. 4:3 LBPlayback in LETER BOX style. (If connected to wide-screen TV, blackbands appear at top and botton of the screen).3. 16:9Select when a wide-screen TV set is connected.System SetupTV System MenuVideo System MenuTV TypeSetup MenuInstalling the Unit1. Dashboard2. HolderAfter inserting the holder into the dasrwhboard, selectthe appropriate tab according to the thickness of thedashboard material and bend them inwards to securethe holder in place.3. Screw1. Dashboard2. Nut (5mm)3. Plan washer4. Screw (5*25mm)5. Screw6. Starp be sure to use the starp to secure the back ofthe unit in place.The starp can be bent by hand to thedesired angle.7. Plain WasherRemove the Unit1. Frame2. Insert fingers into the groove in the front of frame andpull out to remove the frame. (When reattaching theframe,point the side with a groove downwards andattach it).3. LeverInsert the levers supplied with the unit into the groovesat both sides of the unit as shown in figure until theyclick. Pulling the levers makes it possible to remove theunit from the dashboard.Installation using the screw holes on the sides of theUnit.Fastening the unit to the factory radio mountingbracket.1. Select a position where the screw holes of the bracketand the screw holes of the main unit become aligned(are fitted) and tighten the screw at 2 places on eachside.Use either truss screws (5*5 mm) or flush surfacescrew (4*5 mm).2. Screw(“T”Position).3. Dashboard or Console.Note: The mounting box,outer trim ring,and half-sleeveare not used for method B installation.Pull out the battery holder while pressing the stopper 1.Place battery whth (+) mark facing up into the batteryholder.Insert the battery holder into the remote controller.Remove the front panelPress”PWR”button in the upper left corner.Please see picture 1Press “REL”button in the and the pull it out.Please see picture 2Install the front panelPut notch A (shown as picture) onto buckle B, and thenslightly press into the right side.Note: Please don’t insert finger in control panel.Ifconnector is dirty.use a clean soft cloth to wipe it clean.1. Power on/off2. MODE3. PLAY/PAUSE4. MUTE5. TITLE6. SUB-T7. RIGHT8. SETUP9. ANGLE10. SLOW11. VOL+12. ZOOM13. SEL14. SEEK+/15. VOL-16. AUDIO17. Number keys18. GOTO19. PBC20. OSD21. LOC RDM22. SEEK-/23. AMS PRT24. ST/PROG25. STOP/BACK26. DOWN27. LEFT28. ENTER29. BAN/SYS30. UPBANSYSSTPROGAMSPRTLOCRDMTITLEMODEPOW MUTESUB-TENTERSEEK- SEEK+SELPBC1 2 3 45 6 7 89 10 10+ GOTOVOL- AUDIOOSDSETUPVOL+ ZOOMSLOWANGLE1 2 3 49101112131415161856781717192021222324252627282930

/ 1

Related manuals for Xomax XM-DTSB913