YKYI LZ-8052 User Manual
 |
71234568912101113141516User ManualModel：LZ-8052Please read the manual carefully and keep it properlybefore useThis product is a long-handled electric cleaning brush witha toilet brush function, and comes with seven different brushheads that can be used for cleaning various areas in the home.The handle is detachable and adjustable in length for easy use.warning1. Do not immerse the electric cleaning brush in water or otherliquids to avoid electric shock or damage to the equipment.2. Before using the electric cleaning brush, please make sureyour hands are dry to avoid electric shock accidents.3. Do not use the electric cleaning brush to remove hard objectssuch as stones or metals to avoid damaging the equipment orcausing danger.4. During the cleaning process, do not bring the electric cleaningbrush close to the eyes, ears, or other sensitive areas to avoidinjury.5. Do not wear loose clothing or long hair when using theelectric cleaning brush to avoid being entangled or stuck by thecleaning brush.6. When replacing the electric cleaning brush head, be sure toturn off the power and unplug the plug to avoid electric shockaccidents.7. Do not place the electric cleaning brush in a place wherechildren can easily access it to avoid causing accidental injuries.8. When using the electric cleaning brush, do not exceed therecommended use time to avoid overuse that may lead toequipment damage or danger.9. If any faults or abnormalities are found in the electric cleaningbrush, stop using it immediately and contact the after-salesservice center for repair.10. Do not disassemble or repair the electric cleaning brush byyourself to avoid causing equipment damage or danger.Product construction1. rotary shaft2. Gear shift pin3. power switch4. Power indicator light5. Charging port cover6. Big brush7. pointed brush8. small brush9. Rough cloth10.Sponge polishing brush11. Faux wool brush12. Polishing cloth13. Felt disc14. Toilet brush15. Length adjustment switch16. TYPE-C charging cableCharging PrecautionsWireless electric cleaning brush is a convenient and practicalcleaning tool, but it is important to pay attention to the chargingmethod to ensure its normal use. Here are the charginginstructions for the wireless electric cleaning brush:Please note the following points3. Do not let the wireless electric cleaning brush come into contactwith metal objects during charging to avoid short circuits.4. Do not place the wireless electric cleaning brush in a high or lowtemperature environment during charging to avoid affecting thebattery life.1. First, turn off the power switch of the wireless electric cleaningbrush to avoid accidents during charging.2. Find a power adapter with a USB interface and an outputvoltage of DC5V, and insert the USB charging cable into the USBinterface of the power adapter.Fig13. Insert the other end of the USB charging cable into thecharging port of the electric cleaning brush.Fig24. Place the wireless electric cleaning brush on a flat surfaceduring charging to avoid tilting or falling.5. Confirm that the charging indicator light of the electric cleaningbrush is on, indicating that it is charging.6. Wait for about 3-4 hours until all the charging indicator lights ofthe electric cleaning brush are on, indicating that charging iscomplete.7. Remove the USB charging cable and take the electric cleaningbrush off the charger for use.1. Do not use non-original chargers or charging cables to avoiddamaging the electric cleaning brush or affecting the charging effect.2. Do not immerse the wireless electric cleaning brush in water orexpose it to a damp environment during charging.Product User ManualPreparation：- Ensure that the electric cleaning brush is fully charged and thatthe brush head is installed on the electric cleaning brush.(Fig3)- Prepare the cleaning solution.- Press the switch of the electric cleaning brush to ensure that thebrush head is working properly.(Fig4)Here is an introduction to the usage methods and applicablescenarios of each brush head:1. Large flat brush: Suitable for large area cleaning. Install the largeflat brush head on the electric cleaning brush, turn on the power,gently press the brush head, and move it to the surface that needscleaning to achieve the cleaning effect.2.Small flat brush: Suitable for small area cleaning. Install the smallflat brush head on the electric cleaning brush, turn on the power,gently press the brush head, and move it to the surface that needscleaning to achieve the cleaning effect.3. Pointed brush head: Suitable for hard-to-clean areas such ascorners. Install the pointed brush head on the electric cleaning brush,turn on the power, align the tip of the brush head with the area thatneeds cleaning, gently press the brush head to achieve the cleaningeffect.4. Sponge brush head: Suitable for cleaning and polishing delicatesurfaces. Install the sponge brush head on the electric cleaningbrush, turn on the power, gently press the brush head, and move it tothe surface that needs cleaning and polishing to achieve the cleaningand polishing effect.5. Wool-like brush head: Suitable for cleaning leather, glass, andpainted surfaces. Install the wool-like brush head on the electriccleaning brush, turn on the power, gently press the brush head,and move it to the surface that needs cleaning to achieve thecleaning effect.6. Scouring cloth brush head: Suitable for deep cleaning andpolishing of heavily greased surfaces. Install the scouring clothbrush head on the electric cleaning brush, turn on the power,gently press the brush head, and move it to the surface thatneeds cleaning to achieve deep cleaning and polishing effect.7. Polyester cloth brush head: Suitable for surface polishing andwaxing. Install the polyester cloth brush head on the electriccleaning brush, turn on the power, gently press the brush head,and move it to the surface that needs polishing and waxing toachieve the polishing and waxing effect.Usage precautions:- When replacing the brush head, please make sure that theelectric cleaning brush is turned off and disconnected from thepower.- During use, please ensure that the brush head maintains propercontact with the surface for optimal cleaning effect.- After use, please clean the brush head and let it dry to maintainits cleanliness and durability.Installation and Usage Instructions for Toilet Brush1. Preparation: Ensure that the battery is fully charged. Install thetoilet brush spindle into the slot of the connector head and tightenthe positioning ring. Make sure there are no other chemicals insidethe toilet.(Fig5)2. Instructions:a. Turn on the power switch of the electric toilet brush and makesure the brush head is installed on the brush head base.b. Gently place the electric toilet brush into the toilet, ensuring thatthe brush head fully contacts the surface of the toilet.c. Press the start button of the electric toilet brush to begin thecleaning process. The brush head will rotate automatically andrelease the cleaning agent.d. Move the electric toilet brush back and forth in the toilet to ensurethat the brush head covers all areas that need cleaning. You canadjust the angle and position of the brush head as needed.3. Cleaning brush head:a.After use, immerse the electric toilet brush in clean water, activatethe switch, and let the brush head rotate automatically for a fewseconds to complete the cleaning.b. Do not soak the brush head of the electric toilet brush in waterto avoid damaging the electric components.c. Regularly replace the brush head to maintain cleanliness.4. Precautions:a. Do not immerse the electric toilet brush in water or expose it towater to avoid electric shock or damage to the electric components.b. Do not allow the brush head of the electric toilet brush to comeinto contact with the skin or eyes during use to avoid injury ordiscomfort.c. Please keep the electric toilet brush out of reach of children toprevent accidents.d. Do not use the electric toilet brush for cleaning tasks other thanthe toilet.Angle adjustment1. First, make sure the electric cleaning brush is in the closed position.2. Locate the angle adjustment button on the electric cleaning brushand push it downward with your thumb. (Fig6)3. With the other hand, rotate the head of the machine and the angleof the brush head will change. (Fig7)4. Adjust the angle of the brush head according to the cleaning needs,you can choose horizontal, vertical, or any other suitable angle.5. Release the angle adjustment button and the brush head will lockinto the selected angle.1. Firstly, separate built-in lithium battery products from other wastefor collection. Built-in lithium batteries are considered special wasteand should not be mixed with regular garbage.2. Hand over the built-in lithium battery products to professionalelectronic waste recycling organizations or designated collectionpoints. These organizations have specialized equipment andtechnology to safely handle and environmentally friendly dispose ofthe waste lithium battery products.3. Before disposal, deplete the battery power of the built-in lithiumbattery products. This can be done by using the product until thebattery is fully drained or by connecting it to appropriate devices fordischarge.4. Before disposal, package the built-in lithium battery productssecurely to prevent damage or leakage.6. Avoid throwing built-in lithium battery products into fire or causingphysical damage to prevent battery explosions or leaks.7. When disposing of built-in lithium battery products, comply withlocal laws, regulations, and environmental requirements to ensureproper handling and disposal.Disposal methods for abandoned products.1 23 45 6 7尺寸560x200mm 四折面 单黑 双面印 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine