COMPLETE TUNING INSTRUCTIONS FOR THE FLASHLIGHTCONTENTS1. General principles of operating and settings1-1. Engineering menu1-2. Configuration and settings of slots (commands)1-3. Preconfigured user interfaces1-4. Changing of preconfigured user interfaces2. Thermal control settings2-1. Manual thermal control setting2-2. Temperature sensor calibration3. Some particular qualities of Unicorn 1.03-1. Battery check and indication3-2. Basic features of adjustment3-3. Smooth adjustment features3-4. Discrete adjustment features3-5. Features of the Maximum mode with fast access3-6. Slots features1. GENERAL PRINCIPLES OF OPERATING AND SETTINGSCustomization of the Unicorn flashlight operation implies following configuration options:- bringing to the main menu particular additional options (stroboscope, button lock,beacon, button backlight, battery check, tactical mode, additional custom mode);connecting the option with particular command («slot»).- bringing to the main menu particular options of user interface changing (smooth ordiscrete adjustment, memory of modes – on/off, button backlight in the off and onstate); connecting the option with particular command («slot»).Commands are configured through the engineering menu. (pt 1-1, 1-2).Green LED in the button indicates confirmation of the command execution or turning onthe function; Red LED indicates disabling of the function (for example, memory of modesor button backlight).Engineering menu also allows:- quickly switch between three pre-configured user interfaces (pt 1-3);- save the current settings configuration as one of the pre-configured user interfaces (pt1-4);- set up thermal control of the flashlight (pt 2-1, 2-2).1-1. Engineering menuTo access the engineering menu screw the cap until tight while holding the button.To exit the engineering menu de energize the flashlight (unscrew the cap).CAUTION! Before de energizing, make sure that the flashlight is turned off FULLY (button backlight hasgone out or has switched to the permanent mode). Otherwise, unsaved data will be lost!