YOODA 35EV/S Series Manual

YOODA 35EV/S Series Manual Manual pdf 1 page image

EV / S motors are motors with two-way communication and aradio receiver. They have a mechanism for detection ofobstacles, so that the motor stops if sensing resistance in itspath. Detection of obstacles works in both directions, with theuse of lock hangers as well as with springy hangers.Electronic limit position switches set by using the remotecontrol provide ease of programming. Motors provide theability to set the third position.For EV / S motors, it is possible to connect an impulse switchthat controls the motor in "step by step" mode.EV/S series tubular motors are compatible with allYOODA SMART HOME brand devices.Radio receiver memory:up to 10 transmittersMax time of continous work:4 min.Power supply:230 V / 50 HzOperating temperature:from -5°C to 50°CProtection degree:IP 44Illustrations from the top:1. Tubular motor 35 EV/S with obstacle detection2. Tubular motor 45 EV/S with obstacle detectionNon-compliance with the specification might cause risk for life or health and can determine proper work of the blind.We strongly recommend to comply with the specification.Installation of the tubular motor should be performed by specialists with 1kV or higher SEP-certified electrician's licence (SEP - Association of PolishElectrical Engineers) or equal license.Transmitters are compatible with all YOODA SMART HOME brand devices.35EV/S and 45EV/S series tubular motors are compatible with all YOODA SMART HOME brand devices.EV/S tubular motors are motors with two-way communication.35EV/S and 45EV/S SERIES TUBULAR MOTORS1. General information1power supply cablecontrol systemprogrammingbuttoncapacitor motor brake gearantennaMaximal time of continuous work is 4 minutes. After that time thermal protection will be activated preventing motor formoverheating. After that motor will be disabled for about 20 minutes until it cools down.