YSI EXO Quick Start Manual
  |
Sonde Quick Start GuideThank you for using an EXO sondefor your environmental monitoring!This document will assist with theinitial steps required to use anEXO™ sonde.Refer to the EXO User Manual for:• Part numbers and accessories• Maintenance guidelines• Sensor calibration instructions• Connecting EXO to a Data LoggerSee reverse formore information.Items NeededIncluded in Packaging• Sonde• Probes (Sensors)• Batteries• Battery cover wrench• Sensor tool with magnet(to activate Bluetooth)• KOR™ software on USB flash driveNot Included• EXO Handheld or PC runningKOR™ software• USB cable and adapter, field cable,or Bluetooth dongle (sold separately)Preparing Sonde for UseTo prepare the sonde for operation,you will need to:• Install probes into the connectorson the sonde bulkhead• Install batteries• Load KOR™ software onto PC• Connect sonde to EXO Handhelddevice or PCRegistrationRegister your product online toactivate your warranty and keepinformed of software updates:YSI.com/warrantyTMTMThe EXOSonde LineEXO1 EXO2 EXO3EXO2 sKeep your serial number on file:Date of purchase:Unpacking and InspectionInspect the outside of the shippingcontainer(s) for damage. If you see anydamage, contact the shippingcarrier immediately.Remove the equipment from the shippingbox. Some parts are loose in the box, socheck the packing material carefully.item# 603794REFdwg# A603794Jan 2017 Rev. CYSI.comInstall probes into the sonde bulkheadInstall Probes1. Remove buffer bottles and hydrationcaps on the sensors (if applicable).2. Remove the calibration cup and guardfrom the sonde.3. Remove port plugs and insert sensors intoports on the bulkhead. Finger-tightenthe locking rings until snug. Ports are“universal,” which means any sensor canbe plugged into any port.Exception – The wiper must be installed inthe correct port to function properly:• EXO2 / EXO2s – Central Port 7• EXO3 – Port 5 |
manualsdatabase
Your AI-powered manual search engine