C4FM FDMA144/430MHzDUAL BAND TRANSCEIVERFTM-100DROperating ManualBefore UsingInstallation and ConnectionBasic OperationsUsing the MemoryScanningUsing the GPS FunctionUsing the APRS FunctionUsing the GM FunctionConvenient FunctionFunctions to be used whenNecessaryCustomize Menu Settings andUser PreferencesAppendix

how to read this manual

Yaesu FTM-100DR Operating Manual

FTM-100DR

Introduction

About registered trademarks and copyrights

Before Use

Checking the supplied items

Name and function of each component

Rear

Microphone (MH-48A6JA)

Screen display

Input characters

Installation and Connection

Installation location when used in a mobile unit

About the antenna

Installing the main body

Installing the front panel

Connecting the transceiver

Connecting the power supply

Basic Operations

Toggling the operating band

Adjusting the squelch level

Tuning in to the frequency

Switching the operation mode

Selecting communication mode

Switching the modulation mode

Communicating

Adjusting the transmit power

Tone Calling (1750 Hz)

Other settings

Restoring defaults (All Reset)

DG-ID and DP-ID Function

Digital Personal ID (DP-ID) function

Deleting the registered DP-ID

Using the Memory

Recalling memories

Recalling the home channel

Changing the frequency of the home channel

Clearing memories

Naming a memory channel

Displaying the memory tag

Assigning the "WX" function to a programmable key on the microphone

Listening the weather alert

Scanning

Selecting the receiver operation performed after scanning stops

Memory scan

Selecting the scanning method

Using the GPS Function

Using the APRS Function

Using the GM Function

Using the WIRES-X Function

Convenient Functions

Setup menu basic operations

Setup-menu listing

Appendix

Specifications

eu declaration of conformity

What is the GM Function

Deleting stations from the list

Inputting Characters

Checking Received Messages or Images

Deleting messages or images

Sending MESSAGE (Massages) or Images (PICT)

Using routine messages

Replying to the sender of the checked message or image data

Forwarding the checked message or image data

GM Setup Menu

What is WIRES-X

Terminology

Connecting to a Faraway Station Using WIRES-X

Connecting to local nodes

Connecting to a node or room on the Internet

Communicating with others

Useful functions in digital mode

Releasing the WIRES-X connection

Using the News Function of WIRES-X

Viewing text data in nodes or rooms on the Internet

Importing images

Importing data from nodes or rooms on the Internet

deleting a file

Listening to audio messages

Listening to emergency information on the WIRES-X server (INT NEWS)

Listening to emergency information in nodes or rooms on the Internet

Creating and transmitting messages to local nodes

Transmitting saved messages or images to local nodes

Transmitting saved messages or images to nodes or rooms on the Internet

Transmitting routine audio messages to local nodes

Using the FTM-100DR transceiver as a node station

WIRES-X Setup Menu

Important precautions for mobile transceiver operation

How to read this manual

Connecting the external power supply equipment

Preparing a microSD memory card

Inserting a microSD memory card

Initializing microSD memory cards

Communicating in FM mode

Changing the 100.0 Hz CTCSS tone squelch

Locking the DIAL and keys

Adjusting the display brightness

Split memory

Specifying memory channels

Scanning only the specified memory channels

Scanning the programmable memories (PMS)

Scanning the programmable memory channels

Monitoring the home channel

Setting the dual receive restart setting

Checking the satellite acquisition status

Displaying the location information

Checking the route using a personal computer

Using the tone squelch function

Transmitting tone signals

Using the digital code squelch function

Using the DCS function

Using the new pager function

Activating the new pager function

Calling a specific station

Notification of incoming calls from partner stations using the bell function

Other squelch functions

Using the DTMF function

Transmitting the registered DTMF code

Using the timer function

Using the TOT function

Exchanging messages or images

Deleting data from the list

Sending massages or images

Using routine message

Replying to the sender of the downloaded message or image data

Forwarding the downloaded message or image data

Functions to Use as Necessary

card

Using the clone function

Connecting an external device

Transmitting GPS location information

Connecting external device

Using the transceiver for packet communications

Other connectable devices

Customizing Menu Settings and User Preferences

What is APRS

Setting the function manually

Setting your own station call sign

Setting the symbol of your own station

Setting the APRS baud rate

Starting APRS Operation

Receiving APRS Beacons

Explanation of the APRS beacon screen and operation of keys

Viewing the beacon information using packet data (RAW display)

Convenient functions

Sorting the station list

Filtering the list

Deleting information from a list

Transmitting APRS Beacons

Setting the APRS beacon automatic transmission interval

Using SmartBeaconing

Attaching status text to a beacon

Selecting a position comment

Setting the digipeater route

Sending and Receiving APRS Messages

Viewing the message contents

Receiving APRS messages

Sending APRS messages

Using standard text

Replying to a received message

Sorting the APRS message list

Message receipt acknowledgement (ACK)

APRS Set-up Menu List

APRS set-up menu basic operations

Resetting the APRS settings

Using the APRS set-up menu

Filter function settings

Inputting standard message text

APRS reception pop-up setting

Setting the bell ring when a message or beacon is transmitted/received

Call sign setting for CALL RINGER

Data transmission delay time setting

Setting the display units of the APRS data

Transmission beacon information setting

Status text input

Selecting the digipeater route

Automatic response setting of received messages

My position setting

Smart beaconing setting

Sort function and filter settings

Voice alert function setting

List of APRS Bell Rings


Contents how to read this manual	C4FM FDMA144/430MHzDUAL BAND TRANSCEIVERFTM-100DROperating ManualBefore UsingInstallation and ConnectionBasic OperationsUsing the MemoryScanningUsing the GPS FunctionUsing the APRS FunctionUsing the GM FunctionConvenient FunctionFunctions to be used whenNecessaryCustomize Menu Settings andUser PreferencesAppendix Next / 16