Yakima RAILBAR COVER AND LATCH FIX KIT Quick Start Manual
    |
• 5mm hex wrench (or supplied hex wrench included inside leg)• Long Nose Pliers• Pointed Metal Pick or similarFirst time installation• Please read instructions carefully before installation.• Check the contents of kit. If any parts appear missing or damaged contact us through customercare@whispbar.com.Kit Contentsitem Component QtY1 Toggle LHS 22 Toggle RHS 23 Leg Cover LHS 24 Leg Cover RHS 2tools reQuiredremoVe CoVersUsing 5mm hex wrench, unscrew bolt completely andseparate from the nut underneath. Remove the bolt,clamp and nut. Store these three items aside for Step 8.remoVe leG Bolt and ClamP2134RailBaR CoveR and latCh Fix Kit1 2Use keys supplied withRail Bars to unlock legsand remove covers.While holding the keyin the vertical position,pull the cover towardsyou to remove the cover.Repeat for all legs anddiscard covers.Instruction #1035947A-1/4 |
Related manuals for Yakima 8880895
Yakima Rail Bar Quick Start Manual
Yakima SmarT-Slot Kit 2 Quick Start Manual
Yakima LandShark Quick Start Manual
Yakima EXO LitKit Quick Start Manual
Yakima KINGJOE 2 Quick Start Manual
Yakima KingCobra Quick Start Manual
Yakima Q103 Quick Start Manual
Yakima LANDING PAD 17 Quick Start Manual
Yakima Whispbar K1135 Quick Start Manual
Yakima Landing Pad 24 Quick Start Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine