3. Turn on Bluetooth®Be sure your mobile device or tablet isBluetooth enabled. Check that your mobiledevice’s Wi-Fi® is on or your cell phonedisplays a strong signal.4. Download the myQ® App.TIP: If you already have the myQ® App,confi rm you have the latest version tooptimize your myQ® experience.5. Add a DeviceCreate or sign in to your account. Adda new lock and follow instructions inthe myQ ® App.Need Help?Visit support.chamberlaingroup.com,or call Chamberlain Technical Support at1-833-620-0261.WelcometoLet’s get you started.1. Install the Yale | LiftMasterSmart LockNOTE: Do not install the batteries or themyQ® Network Module at this time.Follow the printed installation manual inthe box for instructions on how to installyour Yale | Liftmaster Smart Lock. You canview 3D, interactive instructions on yoursmartphone or tablet by downloading theBILT app and searching for your Yale lock.2. Install your myQ® NetworkModule• Remove the battery cover and batteries.IMPORTANT: Batteries must be removedprior to removing and/or inserting themyQ® Network Module.• Insert the myQ® Network Module, withits visible pins in the bottom right corner,into the slot above the battery compartment.• Reinstall batteries and battery cover.• Enter your 4-8 digit Master Pin codefollowed by• Press 7, followed by• Press 1, followed bymyQ®Module(4) AABatteriesLock andunlock yourdoor with yoursmartphone.NOTE: Use onlyalkaline batteries.DO NOT userechargeablelithium batteries.ALKALINEALKALINEALKALINEALKALINE