YaliTech eti Operating Instructions Manual
Also see for eti: Quick start guide
    |
INSTRUMENT OPERATION - Simply aim the thermometer at the target and pressthe 'Measure' button to display the surface temperature. The distance to targetratio is 1:1 therefore the thermometer should be positioned as close to the targetas possible. Please note: Prolonged use at close range to a source of high or lowtemperature may affect the accuracy of the instrument due to thermal radiation.MIN/MAX - First turn the instrument on by pressing the 'Measure' button, thenpress the 'Mode' button once for maximum or twice for minimum. The 'MAX' or ٔxXzٔǣƬȒȇɯǣǼǼˢƏɀǝِ¨ȸƺɀɀƏȇƳǝȒǼƳɎǝƺٔxƺƏɀɖȸƺٔƫɖɎɎȒȇٕɎǝƺɎǝƺȸȅȒȅƺɎƺȸɯǣǼǼdisplay the minimum or maximum reading only.LOCK - The lock mode is particularly useful for continuous monitoring ofɎƺȅȵƺȸƏɎɖȸƺɀِÁȒɖɎǣǼǣɀƺɎǝƺǼȒƬǸȅȒƳƺًˡȸɀɎɎɖȸȇɎǝƺǣȇɀɎȸɖȅƺȇɎȒȇƫɵȵȸƺɀɀǣȇǕthe 'Measure' button, then press the 'Mode' button three times for the lock modeǔɖȇƬɎǣȒȇِÁǝƺٔn
!kٔǣƬȒȇɯǣǼǼˢƏɀǝًɎǝƺȇȵȸƺɀɀɎǝƺٔxƺƏɀɖȸƺٔƫɖɎɎȒȇɎȒƬȒȇˡȸȅthe lock measurement mode. The thermometer will continuously display thetemperature for up to 60 minutes or until the 'Measure' button is pressed. Pressthe mode button to return to standard measurement.°C/°F ٮÁȒƬǝƏȇǕƺɎǝƺɎǝƺȸȅȒȅƺɎƺȸǔȸȒȅٔ۳!ٔɎȒٔ۳IٔȒȸǔȸȒȅٔ۳IٔɎȒٔ۳!ًٔˡȸɀɎɎɖȸȇthe instrument on by pressing the 'Measure' button, then press the 'Mode'ƫɖɎɎȒȇǔȒɖȸɎǣȅƺɀًɎǝƺٔ۳!ٔȒȸٔ۳IٔɀɵȅƫȒǼɯǣǼǼˢƏɀǝًȵȸƺɀɀɎǝƺٔxƺƏɀɖȸƺٔƫɖɎɎȒȇɎȒchange the scale.EMISSIVITY - The IR-Pocket thermometer is supplied with a default emissivity of0.95. The emissivity of the thermometer can be changed from 0.1 (10E) to 1 (100E).Changes should only be carried out by experienced personnel. To change theƺȅǣɀɀǣɮǣɎɵًˡȸɀɎɎɖȸȇɎǝƺǣȇɀɎȸɖȅƺȇɎȒȇƫɵȵȸƺɀɀǣȇǕɎǝƺٔxƺƏɀɖȸƺٔƫɖɎɎȒȇًɎǝƺȇȵȸƺɀɀɎǝƺٔxȒƳƺٔƫɖɎɎȒȇˡɮƺɎǣȅƺɀǔȒȸɎǝƺƺȅǣɀɀǣɮǣɎɵǔɖȇƬɎǣȒȇِٔ0ٔדחɯǣǼǼˢƏɀǝȒȇɎǝƺLCD screen, press the 'Measure' button to adjust the emissivity value, then pressthe 'Mode' button again to exit the set up screen. For information relating to theƺȅǣɀɀǣɮǣɎɵȒǔɀȵƺƬǣˡƬȅƏɎƺȸǣƏǼɀًȵǼƺƏɀƺɮǣɀǣɎȒɖȸɯƺƫɀǣɎƺȒȸƬȒȇɎƏƬɎɎǝƺ0ÁX³ƏǼƺɀ
ǔˡƬƺِPlease note: non-contact infrared thermometers are not recommendedfor use in measuring the temperature of shiny or polished metals.LED SPOT ALIGNMENT - The LED indicator is not exactly the same as thetarget size. To get the best measurement result, aim at the target within adistance of about 2.5 cm.X«¨ٳ
!k0ÁInfrared ThermometerOperating InstructionsProduct code:814-060Supplied byElectronic Temperature Instruments LtdWorthing · West Sussex · BN14 8HQ01903 202151 · sales@etiltd.com · etiltd.com 814-060/28.09.18Yalitech InstrumentsSantiago de Chile, Río Refugio 9648, Parque de Negocios ENEA, Pudahuel.www.yalitech.cl · ventas@yalitech.cl · (+56 2) 28988221 |
Related manuals for YaliTech eti
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine