Quick Reference Guide - Yealink – CP920 IP Conference Phone1Yealink CP920 IP Conference PhoneABOUT YEALINK CP920The Yealink CP920 addresses today's audioconferencing challenges and unifies a clear and easyconferencing communication experience for both inroom and remote participants. CP920 covers small tomid-sized meetings.When your phone is idle the following screen willdisplay: Status Bar: Displays the default account &feature status icons. The status icons aredisplayed when the features are activated. Soft Keys: Each soft key label indicates theaction for the soft key on the bottom of thescreen.PLACING AND RECEIVING CALLSPlace calls Tap Enter the number using the keypadReceiving Calls Tap or press the Answer soft keyEnding a CallEnd a call in any of the following ways: Tap or press the EndCall soft keyPlacing a Call on HoldTo place an active call on hold: Press the Hold soft key while on an activecall. The screen indicates that the call is onhold.To resume a held call: Press the Resume soft keyCall WaitingIt is possible to make multiple calls, however, only oneactive call can be in progress at any time, other callsare placed on hold.To make a new call during an active call: Press the Hold soft key to place the originalcall on hold Tap the NewCall soft key Enter the number, then tap the Send soft keyTo answer a new call during an active call: Tap the Answer soft key. The active call isplaced on hold, and the incoming callbecomes active.Muting a CallWhile on a call it is possible to place the call on Mute,this prevents the caller from hearing you, but you canstill hear the caller.To mute a call: Press during an active call Press again to un-mute the call The mute key illuminates solid red when thecall is on mute