Yealink SIP-T33G Device Manual
Also see for One Talk CP960: Auto provisioning guideHow to configureGetting startedRecovery guideConfiguring guide
  |
Yealink BYOD Guide - CAP550 W. Adams St., Suite 900, Chicago, IL 60661+1 (866) 629-8200, Option 4info@inteliquent.comInteliquent, We empower communications help.inteliquent.comYealink® Bring Your Own (BYOD) Device GuideIf you already have Yealink devices, they may be compatible with the Inteliquent solution. For Yealink, Inteliquent currentlyaccepts the models listed in the table below. If you already have one of these devices, just follow the instructions toincorporate it into your service.Supported Yealink ModelsSIP-T33G SIP-T54WSIP-T43U SIP-T57WSIP-T46U CP960SIP-T53WBefore You BeginIn order to configure your devices, specific information is needed. At the time you place your Inteliquent order, pleaseprovide a MAC address for each Yealink device. (The MAC address is listed on the bottom or back of the device). Once wehave that information and your order is complete, Inteliquent will email you activation codes for your Yealink devices. Youwill need these towards the end of the instructions below.Repointing and Activating Yealink DevicesTo begin, you will need to factory reset and repoint the devices to the Inteliquent service. Follow the instructions below.1) Reset the device to factory default settings.a) For the SIP-T33G, SIP-T43U, SIP-T46U, SIP-T53W and SIP-T54W, press-and-hold OK for at least 6-7 seconds.b) For the SIP-T57W, press-and-hold the Redial key (right above the Speakerphone key) for at least 6-7 seconds.c) For the CP960, press-and-hold both Mic Mute buttons simultaneously for at least 6-7 seconds.d) The phone will prompt “Reset to factory setting?”.e) Press OK.f) Enter the admin password. Contact support@voyant.com if you don’t know the password. Press OK to continue.g) Allow the phone to reset and return to factory settings.2) Capture the phone’s IP address.a) For the SIP-T33G, SIP-T43U, SIP-T46U, SIP-T53W and SIP-T54W, press the OK button in the center of thenavigation keys on the phone. This will bring up the Status screen.b) For the SIP-T57W, touch Menu, then Status.c) For the CP960, touch Settings, then Network.d) Write down the numbers as shown in the IPv4: row __________________ |
Related manuals for Yealink One Talk CP960
manualsdatabase
Your AI-powered manual search engine