Yealink T46 Quick Tips888.538.3960 | www.momentumtelecom.com/supportExamples provide typical steps for usage of the standard configuration setup. Contact customer service for assistance with customized configurations.CONFERENCE CALLAdd aVHFRQG caller to an active call.To Conference:1.2.Press the Conference soft key toplace the current call on hold.When you hear a dial tone, dial thenumber or extension of the personyou wish to add to make a 3-way call.When they answer, press theConference soft key again.3.GET VOICEMAIL MESSAGESFrom Your Phone:1. Press the Messages button.2.3.Enter your 4 digit PIN when prompted.Select the appropriate option from thevoicemail menu prompts.From Anywhere:1. Call the extension's 10-digit number2. Press the * key when the voicemailannouncement begins to access theVoicemail menu prompts.ANSWER A CALL• Pick up the handset.• Press the Headset button• Press the Speakerphone button• Press the Answer soft keyPLACE A CALL• Pick up the handset, or press theHeadset or the Speakerphone button• Dial number, and then press theSend soft keyHOLD & RESUME CALLSOn hold call displays only on the device usedto place the call on hold.• While on an active call press theHold button located on the rightside of phone.• Press the same Hold button toresume the call before picking upthe handset.• Press the Hold soft key• Call can be resumed by using theResume soft key.TRANSFER CALLSTransfer calls to any extensionConsulted/Warm TransferPress or tap the Transfer soft key Enter or select the extension or phonenumber and press Send, OK or the #button to dial and wait for an answer. Speak to the recipient and press ortap the Transfer soft key again tosend the call when ready.Blind/Cold Transfer Press or tap the Transfer soft key Dial or select the ext/phone numberor tap the Transfer soft Presskey again.END CALLSYou can only end active calls. To end an OnHold call, you must resume the call first.To End an Active Call:Replace the handset in the cradle.Press the Headset buttonPress the Speakerphone buttonPress the End Call soft keyAnd if using a headset or the speakerphone: