Yealink W52P Quick Start Up Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Yealink W52P Quick Start Up Manual Manual pdf 1 page image

TPG BizPhoneP a g e | 1 of 2IP DECT W52PQuick Startup GuidePackaging ContentsThe following contents are included in your W52P package:Assembling the Phone1. Connect the network and power for the base station in one ofthe following ways, as shown below.2. Connect the handset and optional headset, as shown below.3. Insert the battery into the handset, as shown below.4. Charge the handset, as shown below.The charging status of the handset is indicated in the topright-hand corner of the LCD screen.Startup the PhoneThe IP Phone is pre-registered to the base station. After the IPPhone is connected to the network and the power, it willautomatically start the initialization process by connecting to TPGBizPhone’s servers to obtain the configuration and updates(maximum 10 minutes).The LCD screen will indicate the current status of the process(initializing or configuration updating). The phone may reboot fewtime during this process. After the final reboot, the phone is readyto use.

/ 2

Related manuals for Yealink Telkom W52P