York PCG6B36 Technical Manual

Also see for PCG6B36: Technical guide Installation manual

Contents

unit dimensions

York PCG6B36 Technical Manual Manual pdf 1 page image

TECHNICAL GUIDESINGLE PACKAGEAIR CONDITIONER / GAS HEAT16 SEER – R-410A – 208/230V - 3 PHASE3 THRU 5 NOMINAL TONS65 - 125 MBH HEAT INPUTMODELS: PCG6*36 THRU 60Due to continuous product improvement, specificationsare subject to change without notice.Visit us on the web atwww.upgnet.com and www.york.comAdditional rating information can be found at:www.ahridirectory.orgWARRANTY SUMMARY*Standard 1-Year limited parts warranty.Standard 5-Years limited compressor warranty.10-Year gas heat exchanger warranty.*See limited warranty certificate in User’s Information Manual for details®5291596-YTG-E-1117FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALEDESCRIPTIONThese packaged cooling/heating air conditioners are designedfor outdoor installation. Only utility and duct connections arerequired at the point of installation.FEATURES• Operating Efficiency - All PCG6 model gas units provide aminimum AFUE of 81.0% in heating and 16.0 SEER, 12.0EER rating for cooling operation. All models meet CaliforniaLow-Nox requirements of 40 ng/joule emission level for AirQuality Management Districts. All PCG6 models utilize amulti-stage compressor for maximum comfort and efficiency.• On Site Flexibility - All model sizes use a compact designcabinet. Field convertible duct connections from side flow todownflow allows the installer to have greater flexibility withless inventory.• Lower Installation Cost - Installation time and costs arereduced by easy power and control wiring connections. Thesmall base dimension means less space is required on theground or roof. All units are completely wired, charged withR-410A and tested prior to shipment. Test stations using astate-of-the-art computerized process system are used toensure product quality. Refrigerant charge and componentpart numbers are verified via computers during assembly.Vital run test statistics such as system pressure, motor cur-rents, air velocity and temperature, unit vibration, and gassystem safeties are monitored and recorded by the system toensure unit performance. Equal size side supply and returnduct connections allow easy connection of ducts to matchlow crawl spaces without transition pieces.• Utility Connections Made Easy - Gas and electric utilityaccess provided through the bottom or the side of the unit.Utility connections can be made quickly and with a minimumamount of field labor. A field supplied and field installed elec-trical disconnect switch must be installed.• Convertible Airflow Design - The bottom duct openings arecovered when they leave the factory, ready to be used for aside supply/side return application. If a bottom supply/bottomreturn application is desired, simply remove the two panelsfrom the bottom of the unit and place them in the side supply/side return duct openings. No panel cutting is required andno accessory panel is necessary. Convertible airflow designallows maximum field flexibility and minimum inventory.• Condensate Pan - A corrosion-resistant, long-lasting, water-tight pan is positioned below the evaporator coil to collectand drain all condensate, preventing build-up of stagnantcondensate. The condensate pan conforms to ASHRAE 62-89 standards (Ventilation for Acceptable Indoor Air Quality).• Condensate Drain - The 3/4 inch NPT female connection isrigidly mounted to assure proper fit and leak tight seal.• Durable Finish - The cabinet is made of G90 galvanizedsteel with a powder paint coating for appearance and protec-tion. The pre-treated galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Pow-der paint finish ensure less fading when exposed to sunlight,and provides superior corrosion resistance (1000 hour saltspray tested).Continued on next page.