York TM9M Technical Manual

Also see for TM9M: User's information manual User's information manual Installation manual

York TM9M Technical Manual Manual pdf 1 page image

TECHNICAL GUIDE97% AFUE MODULATING PSCRESIDENTIAL GAS FURNACESMULTI-POSITIONMODELS: TM9MNATURAL GAS60 - 120 MBH INPUTDue to continuous product improvement, specificationsare subject to change without notice.Visit us on the web at www.york.comAdditional rating information can be found atwww.ahridirectory.orgWARRANTY SUMMARYA 20-year limited warranty on heat exchangers in residentialapplications.A 10-year warranty on the heat exchanger in commercialapplications.Standard 5-year limited Parts warranty.Extended lifetime heat exchanger and 10-year limitedparts warranty when product is registered online within90 days of purchase for replacement or closing for newhome construction.See Limited Warranty certificate in Users Information Manual for details.563717-YTG-C-0713FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALEDESCRIPTIONThese compact units employ induced combustion, reliable hotsurface ignition and high heat transfer aluminized tubular heatexchangers. The units are factory shipped for installation inupflow or horizontal applications and may be converted fordownflow applications.These furnaces are designed for residential installation in abasement, closet, alcove, attic, recreation room or garage andare also ideal for commercial applications. All units are factoryassembled, wired and tested to assure safe dependable andeconomical installation and operation.These units are Category IV listed and may be vented eitherthrough side wall or roof applications using approved plasticcombustion air and venr piping.FEATURES• Modulating heating operation includes:- Modulating gas valve, inducer and circulating blower- Modulating operation from 100% to 35% input in 100%increments with nearly constant temperature rise.• Easily applied in upflow, horizontal left or right, or downflowinstallation with minimal conversion necessary.• Compact, easy to install, ideal height 33" tall cabinet.• Blower-off delay for cooling SEER improvement.• Easy access to controls to connect power/control wiring.• Built-in, high level self diagnostics with fault code display.• Low unit amp requirement for easy replacementapplication.• All models are convertable to use propane (LP) gas.• Electronic Hot Surface Ignition saves fuel cost withincreased dependability and reliability.• 100% shut off main gas valve for extra safety.• 24V, 40 VA control transformer and blower relay suppliedfor add-on cooling.• Hi-tech tubular aluminized steel primary heat exchangerwith stainless steel tube/aluminum fin secondary heatexchanger for outstanding efficiency.• Solid removable bottom panel allows easy conversion.• Airflow leakage less than 1% of nominal airflow forductblaster conditions.• No knockouts to deal with, making installation easier.• Movable duct connector flanges for application flexibility.• Quiet inducer operation, burner, and blower operation.• Inducer rotates for easy conversion of venting options.• Fully supported blower assembly for easy access andremoval of blower.• External air filters used for maximum flexibility in meetingcustomers IAQ needs.• Insulated blower compartment for thermal and acousticperformance.• 1/4 turn knobs provided for easy independent doorremoval.• Internal condensate trap design (patent pending) providescondensate management options and is self priming toprevent nuisance problems.• 4 speed, direct drive, PSC motor.

/ 4

Related manuals for York TM9M