York YCS18 THRU 60 Technical Manual

Contents

York YCS18 THRU 60 Technical Manual Manual pdf 1 page image

TECHNICAL GUIDELX SERIESSPLIT SYSTEMAIR CONDITIONERS14 SEER – R-410A – 1 PHASE1.5 THRU 5 NOMINAL TONSMODELS: YCS18 THRU 60Due to continuous product improvement, specificationsare subject to change without notice.Visit us on the web atwww.upgnet.com and www.york.comAdditional rating information can be found atwww.ahridirectory.orgWARRANTY SUMMARY*Standard 5-year limited parts warranty.Standard 10-year limited compressor warranty.Extended 10-Years limited parts warranty when product isregistered online within 90 days of purchase for replacementor closing for new home construction.*Does not apply to R-22 models, 3-Phase models, or internet sales.See Limited Warranty certificate in User's Information Manual for details.FOR INSTALLATION IN ALL US REGIONS AND CANADAInstallation Allowed®5006080-YTG-B-1215FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALEDESCRIPTIONThe YCS models are the newest addition to our successful LXSeries split system air conditioner lineup. Optimized for the new14 SEER Regional Minimum Efficiency and the high EERrequired in the Southwest US, these outdoor units are specifi-cally designed to be matched with Johnson Controls UnitaryProducts indoor coils, furnaces, and air handlers to provide acomplete system solution.FEATURES• Small Footprint - Minimum footprint for easier handling,transportation, and installation.• Easier Installation - Independent panels provide quickaccess for unit setup. Installation time is reduced by easypower and control wiring access. Select indoor matches withfactory-mounted TXVs are available for quicker systeminstallation. The factory installed filter-drier and factorycharge for a 15-Ft lineset means less time spent brazing andcharging the system. The small base dimension and reducedunit clearances make for easier retrofits.• Accessible Information - QR code on unit provides quickaccess to technical documents and warranty information.• Durable Finish - The coated steel wire fan guard, coatedexternal fasteners, and pre-treated G90-equivalent galva-nized steel chassis components resist corrosion and rustcreep. Champagne colored powdercoat paint further protectsexternal panels.• Quality Coils - The high efficiency microchannel aluminumcoil is manufactured using an improved material system pro-viding reliable performance and small unit size.• Rugged Coil Protection - Coils are protected from mechan-ical damage by a proven stamped steel coil guard design.• Protected Compressor - Compressors are protected inter-nally by a high pressure relief valve and a temperature sen-sor, and externally by the system high pressure switch. Theliquid line filter-drier is factory installed to protect the com-pressor against moisture and debris.• Reliable Operation - Ball bearing fan motors provide supe-rior performance in extreme temperatures.• Environmentally Friendly - CFC-free R-410A refrigerantdelivers environmentally friendly performance with zeroozone depletion.• Top Discharge - Warm air is blown up, away from the struc-ture and any landscaping and allows compact location onmulti-unit applications.• Low Operating Sound Levels - Developed using CFD andFEA tools, the sturdy cabinet and top design provides soundperformance of 76 dBA or lower. Compatible accessories forfurther sound reduction are also available.• Better Service Access - Diagonal base valves with openaccess for low-loss fittings, single panel access to the electri-cal controls, swing out control box for full corner access, andremovable fan guard allow easy access for unit mainte-nance.• Agency Listed - Safety certified by CSA to UL 1995 / CSA22.2. Performance certified to ANSI/AHRI Standard 210/240in accordance with the Unitary Small Equipment certificationprogram.