ZENEC Z-E3726 Installation Manuallines

Also see for Z-E3726: Quick start manual Installation guidelines Installation manual

ZENEC Z-E3726 Installation Manuallines Manual pdf 1 page image

INSTALLATION GUIDELINES(C10L)-ESSENTIAL RevA Update v3.4.0Page 1 of 2 ALRequirements:Note: This is only a MainSystem Software update via USB drive USB stick with at least 2 GB memory. A Windows based PC or notebook to prepare the USB. Make sure that navigation microSD card inside microSD card slot of your ZENEC naviceiver (!) Don`ttake out navigation microSD card.Note: The USB stick must be formatted to FAT32 before use (right-click on the USB drive in the Win Explorer choose “Format”  select FAT 32  start).Installation of MainSystem Software Update via USB drive:1. Download the software update package „Z-E3726_FEU_SW_v3.4.0.exe”.2. The software package is a self-unzipping executable. Start extraction with a double-click and select yourUSB stick as target for the uncompressed files.3. You obtain a folder called „C10_SW_Update” in the root directory of the USB stick.4. Make sure that navigation microSD card inside microSD card slot of your naviceiver (!) Don`t take outnavigation microSD card.5. Connect the USB stick to your naviceiver.6. Enter the naviceiver setup. Tap on “Device Setup”  “Help” ”Software Update” “OK”.7. The naviceiver will restart and show the ZENEC boot logo for 55sec., then auto-switch to update dialogmenu.8. Make sure that, checkbox „1. APP” is selected. If so, tap on the „Update“ button to start the updateprocess.9. Your system will be updated in a step-by-step process. The complete update procedure takes approx. 2minutes. A status bar shows the update progress.10. Please restart your ZENEC naviceiver, if the update process has completed successfully.11. Calibrate the touch screen with a suitable pen.12. Remove the USB stick.13. Enter the naviceiver setup. Tap on “Device Setup”  “Help”  ”Load Factory”  “OK”.14. Please do a versions check.Version checking:After completion of the software update, version checking is crucial to validate full success. If the installedsoftware version differs with listed versions below, a full re-installation of the entire software update isrequired.Review of device software version:To check the Main Software Version, enter the naviceiver setup. Tap on “Device Setup” ” “Help” ”Version Info”.Version: 3.4.0DeviceID: Z_E3726Notes: Do not operate or turn off while device is performing a software update. After completion of the software update always load the factory defaults.[Setup  „Device Setup”  “Help”  ”Load Factory”  “OK”]

/ 2

Related manuals for ZENEC Z-E3726