Preparation:Carefully read the entire installation guide and keep it nearby for later reference. This preparation guide describes how tocorrectly copy the update files on one SD-card and four USB sticks. If you only have one USB data carrier at hand, makesure to reformat it with FAT32 each time after one update step is completed, just before copying the next file on-stick.1) Unzip the file ZE-MC294 Update V.1.00You’ll receive three directories.2) Preparation Part 1 MPEGOpen the folder „MPEG“. You`ll find two files.Format a USB stick with FAT 32 and label it "MPEG".Copy both files to the root directory of the USB stick.3) Preparation Part 2 BT-3.60Open the folder "BT-3.60". You`ll find three files.Format a USB stick with FAT 32 and label it "BT".Copy the three files to the root directory of the USB stick.4) Preparation Part 3 MCUOpen the folder "MCU". You`ll find two files.Format a USB stick with FAT 32 and label it "MCU".Copy the two files to the root directory of the USB stick.W W W . Z E N E C . C O MZE-MC294 UPDATE-PREPARATIONHow to copy the necessary files to USB data carriers1 von 222nd of July, AL