ZENEC ZE-RVC85WA Mounting Instructions

Also see for ZE-RVC85WA: Mounting instructions

ZENEC ZE-RVC85WA Mounting Instructions Manual pdf 1 page image

MOUNTING INSTRUCTIONSZE-RVC85WAZE-RVC85WAFRONT / REAR VIEW CAMFRONT / REAR VIEW CAMKEY FEATURES• Compact “wide angle” universal camera• Two different housing types, each with two adhesive pads, areincluded in delivery• System design allows front- or rear- mounting and use• Detailed high contrast picture suited for twilight conditions• Separable 3-part system cable, with cable parts of 0.7 m +7.0 m + 0.7 m length• Normal or mirror image picture output selectableDESCRIPTION:The ZENEC wide angle cam model ZE-RVC85WA was developedfor universal use, allowing retrofitting of a great variety of vehiclesdue to its extremely compact housing shape. The picture can beoutputted as normal or mirror image, for mounting and utilizationof this model as front- or as rear view camera. Besides, the ZE-RVC85WA is a true wide angle cam, offering an enormous horizon-tal view angle of 190°.This product is compatible with a wide variety of 2-DIN A/V receiversof the aftermarket and the ZENEC E>GO product line up, includingZENEC 2-DIN infotainers and naviceivers. CAUTION:■ Use the included connection cable exclusively. Altering or replacing it will void your warranty.■ The camera is water- and dustproof and has been licensed according to the international standard IP69K. However,vehicle cleaning using high pressure water and steam jet devices may still lead to damage of IP69K rated cameramodels by water intrusion. Keep a distance of at least one meter between the water nozzle and the camera housing.Technical Specifications:Image device: ¼” / 6.4 mm Aptina ASX340 CMOS sensorLens focal length: f1.05TV system: NTSC / 60 HzView angle: 210°(D) x 190°(H) x 140°(V)Native sensor resolution: 680 (H) x 512 (V) pixelsResolution of video-out: > 420 TV linesFrame rate: 60 fields/sec.Signal to noise ratio: > 48 dBLight sensitivity: 0.5 Lux/F1.2/50IREVideo output: 1.0 Vp-p, 75 ohms CVBSWhite balance: AutoBacklight compensation: AutoGamma correction: 0.45Gain control: AutoSync system: AutoPower supply: DC 5 – 16VCurrent consumption: 60mA (DC12V) / ≤ 720mWIP protection rating: IP69KOperating temperature: -30°C~+75°Clnstall the ZE-RVC85WA in the insert of the license illumination plate.Take off the panel and drill a Ø 6.5 mm diameter hole.Assemble the camera as shown in the two explosions drawings:Left picture = Rear cameraRight picture = Front cameraPut the cable through the hole and fasten the camera to the car, usingthe adhesive pad.Important: Use the supplied metal ring only for the rear camera housing.ZENEC by ACR AG ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ SwitzerlandEU Legal Representative: ACR S & V GmbH ∙ Industriestr. 35 ∙ D-79787 Lauchringen ∙ Germanywww.zenec.comRev. DVideo Out(connect to Moni-/Naviceiver)7.0 m0.7 m0.7 mRear camera mode: Green cable openFront camera mode: Green cable twistedHousing Front camera2A fuseHousing Rear cameraRed: Cam PWR (+12 V)Black: GNDYellow: B+ 12V (KL15)ZE-RVC45DT: 10R-0514099E13, 10R-0514099Rear camera Front camera

/ 4

Related manuals for ZENEC ZE-RVC85WA