ZIGBEE SR-ZG9001K8-DIM Quick Start Manual
    |
Single Color Wall Mounted ZigBee Remote Controller 7010000555.57 mm71.20 mm11 mmFunction introductionImportant: Read All Instructions Prior to InstallationFront sideBack sideBattery: CR2450Before the first use, please remove the protective film55.57 mm71.20 mmThe remote control can be fixed onthe wall with 3M glue or screw.71.2x71.2x13.6mmPress and hold down both keys together to search andpair to ZigBee network or factory reset the controller.Group 1Click to turn on. Press andhold down to increaselight intensity.Note: This remotesupports 4 groups forbinding max. 30 lightingdevices.Transmission Range(free field) 30mOperating temperature 0-40°CRelative humidity 8% to 80%Dimming Range 0.1%-100%Power Supply 3VDC (CR2450)Operation Frequency 2.4GHzDimensionsProtection Type IP20Group 1Click to turn off. Press andhold down to decreaselight intensity.Group 3 Group 3Group 2 Group 2Group 4 Group 4• This device contains a button lithium battery that shall be stored and disposed properly.• DO NOT expose the device to moisture.Safety & WarningsProduct Data• ZigBee dim remote based on ZigBee 3.0• Enables to control both single color lighting devices• Battery powered remote with low power consumption• Enables to pair ZigBee lighting devices via touchlinkcommissioning without coordinator• Supports find and bind mode to pair with ZigBee lightingdevices• Supports 4 groups for binding max. 30 lighting devices• 2.4 GHz global operation• Transmission range up to 30m• Compatible with universal ZigBee Gateway products• Compatible with universal single color ZigBee lightingdevicesZigBee Clusters Supported by This Remote Are As Follows:Input clusters:• Basic • Power Configuration • Identify • DiagnosticsOutput clusters:• Identify • Group • On/off • Level control • OtaNetwork pairing mode: click both buttons 3 times toset the remote into network pairing mode (the remoteshould not belong to any gateway network).Factory reset: click both buttons 3 times toreset the remote (the remote should alreadybe paired to a gateway).Quick Start (Simplified operation compared to standard operations in the part “Operation”)Touchlink + Add Group 1: Press and holddown both keys for 3 seconds to starttouchlink and light device to group 1.linkTouchlink + Add Group 2: Press and holddown both keys for 3 seconds to starttouchlink and light device to group 2.linkTouchlink + Add Group 3: Press and holddown both keys for 3 seconds to starttouchlink and light device to group 3.linkTouchlink + Add Group 4: Press and holddown both keys for 3 seconds to starttouchlink and light device to group 4.link |
Related manuals for ZIGBEE SR-ZG9001K8-DIM
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine